Filter cartridge PTFE membrane air filter cylinder equipment 10'',20'',30'',40'' gas cartridge

Filter cartridge PTFE membrane air filter cylinder equipment 10'',20'',30'',40'' gas cartridge

It offers a wide range of chemical compatibility with high thermal stability, specially used for the filtration of compressed air/gas, vent air and aggressive chemical solutions including acids, alkalis, solvents, photoresists, etc.

Each unit is pre-flushed with ultra-pure water and integrity tested before release from our factory.

1. Naturally hydrophobic PTFE membrane with excellent porosity, high flow rate;

2. Absolute rating, filtration efficiency≥99.99%, Up to 0.01 micron in gas filtration;

3. Low pressure drop and long service life;

4. Wide chemical compatibility, resistant to strong alkali, acids, aggressive gases and solvents;

5. High temperature endurance performance;

6. 100% integrity tested before final assembly;

Materials Of Construction		Filter Media:		Hydrophobic PTFE membrane
		Support Layers:		Polypropylene
		Micron Rating:		0.1, 0.2, 0.45, 0.65,1.0, 3.0um
		Inner core:		Reinforced Polypropylene/Stainless Steel
		Outer Cage, End caps:		Reinforced Polypropylene
		Seal Method:		Thermal Bonded, No Adhesives
		O-rings/gaskets:		Silicone, Nitrile, EPDM
Cartridge Dimensions		Outer Diameter		69mm(2.75'')
		Inner Diameter		33mm(1.30'')
		Length(based on DOE end caps)		10", 20", 30", 40"
		Filtration Area(m2)		0.65 m 2 per 10''
Operating Conditions		Normal Operating Temperature:		Up to 65℃ (140℉)
		Max.Operating Temperature:		90℃ (194℉) at P≤1.0 bar (14.5psi)
		Max. Differential Pressure
		Normal Flow direction:		4.2 bar (60 psi) at 25℃ (77℉)
		Reverse flow direction:		2.1 bar (30psi) at  25℃ (77℉).
		PH Value compatibility:		1-14
Typical flow rate @ 25 ℃(10"):
Cartridge Safety		Endotoxin:		<0.25 EU/ml
		Extractables:		0.03g / 10"