- Product Details
- {{item.text}}
Quick Details
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Meanwell
-
Model Number:
-
HLG-600H-12
-
Output Frequency:
-
47 ~ 63Hz
-
Output Current:
-
40A
-
DIMENSION:
-
280*144*48.5mm (L*W*H)
-
PACKING:
-
3.9Kg; 4pcs/16.6Kg/0.9CUFT
Quick Details
-
Output Power:
-
>500W
-
Input Voltage:
-
90 ~ 305VAC 127 ~ 431VDC
-
Output Voltage:
-
12V
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Meanwell
-
Model Number:
-
HLG-600H-12
-
Output Frequency:
-
47 ~ 63Hz
-
Output Current:
-
40A
-
DIMENSION:
-
280*144*48.5mm (L*W*H)
-
PACKING:
-
3.9Kg; 4pcs/16.6Kg/0.9CUFT
Meanwell dimmable led power supply HLG-600H-12 600W 12v led power supply constant current
12v led power supply constant current
1.Protection:SC/OC/OV/OT
2.Built-in Active PFC
3.Dimming Function
5 Years Warranty
| MODEL | HLG-600H-12 | |
| OUTPUT | DC VOLTAGE | 12V |
| Constant Current Region | 6 ~ 12V | |
| RATED CURRENT | 40A | |
| RATED POWER | 480W | |
| RIPPLE&NOISE(max.) Note.2 | 150mVp-p | |
| VOLTAGE ADJ. RANGE Note.5 | 10.2 ~ 12.6V | |
| CURRENT ADJ. RANGE | Can be adjusted by internal potentiometer or through output cable | |
| 20 ~ 40A | ||
| VOLTAGE TOLERANCE Note.3 | ±3.0% | |
| LINE REGULATION | ±0.5% | |
| LOAD REGULATION | ±2.0% | |
| SETUP, RISE TIME Note.8 | 500ms, 80ms at full load 230VAC/115VAC; | |
| HOLD UP TIME (Typ.) | 15ms at full load 230VAC/115VAC | |
| INPUT | VOLTAGE RANGE Note.5 | 90~305VAC 127~431VDC |
| FREQUENCY RANGE | 47~63Hz | |
| POWER FACTOR (Typ.) | PF>0.98/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load (Please refer to “Power Factor Characteristic” curve) | |
| TOTAL HARMONIC DISTORTION | THD<20% when output loading>=50% at 155VAC/230VAC input and output loading>=75% at 277VAC input | |
| EFFICIENCY (Typ.) | 230VAC/92% 277VAC/92.5% | |
| AC CURRENT (Typ.) | 7A/115VAC 3.3A/230VAC 2.9A/277VAC | |
| INRUSH CURRENT (typ.) | COLD START 70A(twidth=1000£gs measured at 50% Ipeak) at 230VAC | |
| LEAKAGE CURRENT | <0.75mA/277VAC | |
| PROTECTION | OVER CURRENT | 95~108% |
| Protection type : Constant current limiting, recovers automatically after fault condition is removed | ||
| SHORT CIRCUIT | Constant current limiting, recovers automatically after fault condition is removed | |
| OVER VOLTAGE | 13 ~ 16V | |
| Protection type: Shut down O/P voltage with auto-recovery or re-power on to recover | ||
| OVER TEMPERATURE | Shut down o/p voltage, re-power on to recove | |
| FUNCTION | REMOTE ON/OFF CONTROL | Power on : "Hi" >2 ~ 5V or (Open circuit) Power off : "Low" <0 ~ 0.5V or (Short circuit) |
| 5V STANDBY | 5V : 5V/0.5A ; tolerance ±5.0%, ripple : 100mVp-p(max.) | |
| ENVIRONMENT | WORKING TEMP. | -40~+70°C (Refer to “Derating Curve”) |
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing | |
| STORAGE TEMP., HUMIDITY | -40~+85°C, 10~95% RH | |
| TEMP. COEFFICIENT | ±0.03%/°C(0 ~ 60°C) | |
| VIBRATION | 10~500Hz, 5G 12min./1 cycle, period for 72min. each along X,Y,Z axes | |
| SAFETY& | SAFETY STANDARDS Note.7 | UL8750, EN61347-1, EN61347-2-13 independent CSA C22.2 No. 250.13-12, , approved. |
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-F/G: 100M Ohms / 500VDC / 25°C / 70%RH | |
| EMC EMISSION | Compliance to EN55015, EN55022(CISPR22) Class B, EN61000-3-2 Class C ( 50% load) ; EN61000-3-3 | |
| EMS IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A | |
| OTHERS | MTBF | 76.9K hrs min. MIL-HDBK-217F(25°C) |
| DIMENSION | 280*144*48.5mm(LxWxH) | |
| PACKING | 3.9Kg; 4pcs/16.6Kg/0.9CUFT | |
| NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. | |
| 2.Ripple&Noise are measured at 20MHz of bandwidth by using a 12’’ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | ||
| 3.Tolerance: includes set up tolerance, line regulation and load regulation. | ||
| 4.Constant current operation region is within %50-100% rated output voltage. This is the suitable operation region for LED related applications,but please reconfirm special electrical requirements for some specific system design. | ||
| 5.Derating may be needed under low input voltages. Please check the static characteristics for more details. | ||
| 6.A Type only. | ||
| 7.Safety and EMC design refer to EN60598-1, subject CNS15233, GB7000.1, FCC part18. | ||
| 8.Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. | ||
| 9.The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must re-qualify EMC Directive on the complete installation again. | ||
| 10.Refer to warranty statement. | ||
1.Q:Are you a factory or trading company?
A:We are a Factory,Distributor and Trading Company.
2.Q:Where is your factory located?How can i visit there?
A:Our factory and office is located in Shenzhen City,China.You can fly to Shenzhen Baoan Airport clients,from home or abroad,are warmly welcome to visit us!
3.Q:How can i get some samples?
A:We are honored to offer you samples.
4.How does your factory do regarding quality control?
A:Quality is priority.We always attach great importance to quality controlling for to the very end.Our factory has gained CE,ROHS,SGS authentication.
