- Product Details
- {{item.text}}
Quick Details
-
Item volume:
-
125
-
Nozzle opening:
-
1.4 mm
-
Plastic cup capacity:
-
600ml
Quick Details
-
No-Load Speed:
-
300
-
Model Number:
-
3781
-
Place of Origin:
-
Shanghai, China
-
Item volume:
-
125
-
Nozzle opening:
-
1.4 mm
-
Plastic cup capacity:
-
600ml
Packing & Delivery
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
Product Description
* Air Spray Gun Paint Spray Low Pressure Coating: HVLP (High Volume Low Pressure) type spray gun. It uses a large amount of
low-pressure air to reduce paint splattering and enable efficient coating with a small amount of paint!
low-pressure air to reduce paint splattering and enable efficient coating with a small amount of paint!
Spraying Technique
CAUTION: DO NOT STOP WHEN SPRAYING.
CAUTION: DO NOT STOP WHEN SPRAYING.
Spraying materials will start to set and dry.as soon as they come in contact with the air.
They will cause a permanent clog if not cleared.immediately.If discontinuing spraying for more than half an hour, turn off the air
supply, disconnect Cup from Gun Body and thoroughly rinse Cup and Gun Body with fresh, clean water.
Paint Preparation and Filling
Note:Proper paint mixture is essential. Follow the manufacturer’s directions. Most paints will spray easily if they are thinned
properly.
1. Thread the Cup to the Gun Body and tighten until the Cup is securely in place.
2. Thin the paint according to manufacturer’s directions and mix thoroughly.
3. Carefully strain the paint through a paint strainer or a piece of cheesecloth.
They will cause a permanent clog if not cleared.immediately.If discontinuing spraying for more than half an hour, turn off the air
supply, disconnect Cup from Gun Body and thoroughly rinse Cup and Gun Body with fresh, clean water.
Paint Preparation and Filling
Note:Proper paint mixture is essential. Follow the manufacturer’s directions. Most paints will spray easily if they are thinned
properly.
1. Thread the Cup to the Gun Body and tighten until the Cup is securely in place.
2. Thin the paint according to manufacturer’s directions and mix thoroughly.
3. Carefully strain the paint through a paint strainer or a piece of cheesecloth.
Specification
|
item
|
value
|
|
Model Number
|
3781
|
|
Warranty
|
3 years
|
|
No-Load Speed
|
300
|
|
Place of Origin
|
China
|
|
|
Shanghai
|
|
Item volume
|
125
|
|
Nozzle opening
|
1.4 mm
|
|
Plastic cup capacity
|
600ml
|
Hot Searches
