5kw portable air single oil silver 12v 24v 39 14 x 14cm campervan parking heater

The heater is a small fuel furnace single chip microprocessor controlled bya. Its furnace body (heat exchanger) is located inside a hooded box that serves as a separate air passage. Cold air is drawn into the air passages and blown by a heating fan. When it gets hot, it appears to form another heating system, independent of the original heating system. In this way, the heater can provide heat compartments for the cab and passengers whether the engine is operating normally or not. The heater* is automatically controlled. It is compact structure, easy to install, energy saving, environmental protection, safety and reliability, easy maintenance, etc..

The heat exchanger is a combustion furnace body, die-cast aluminum, heat sink around the back end. The combustion tube is installed in the inner cavity. The front combustion tube is inserted into the burner, the fuel comes to the burner core through the fuel tube and is ignited by the electric plug after atomization. The flame enters the gap between the inner walls of the furnace body through the combustion tube at the rear end of the conduit, and the exhaust air is discharged through the exhaust pipe exhaust port. Fresh air to support furnace combustion comes from the support air inlet and is delivered through it to the air blades of the combustion tube combustion support fan motor.

The controller is located at the front and rear of the heaer heating the fan impeller. The controller mainly consists of collection circuitry and temperature circuitry microprocessor for detecting monolithic signals, drive circuitry, frequency, speed, and voltage. There is automation of the heating process, automation of the functions of system monitoring, and automation of trouble shooting.