Factory Supply C20/C25/C30 Concrete Guniting Machine Dry Mix Concrete Shotcrete Spraying Machine

Shotcrete spraying machine is used for dry shotcrete and tidal shotcrete. It has the characteristics of advanced technology, reasonable structure, stable performance, convenient operation and maintenance, and long service life. It is widely used in tunnel, culvert, subway, hydroelectric engineering, underground engineering and mine roadway shotcrete construction in high marsh mine.

Main technical parameters of shotcrete spraying machine:

Prepare for startup shotcrete spraying machine:
Check the connection of each line of the electronic control system is firm and there is no leakage phenomenon. Observe the oil mark and check whether the lubricating oil in the reducer is sufficient. Check whether the fastening of all parts of the machine is correct and reliable. Operate the machine for a short time in order to grasp the rotation situation (pay attention to whether the direction of operation is the same as the direction of arrow, pay attention to avoid the heating of friction plate). Check the pressure applied to the sealing plate. First, it is used to lock the nut on the clamping device rod until it is pressed. Then, it is used to tighten 2-3 rings with a wrench until the sealing plate does not leak air.

Operation Method of shotcrete spraying machine:
After the preparation work is finished, the mixing material can be added to the machine. The machine operator should first open the main valve, the valve of the upper air duct opens 1/3 circles, and then adjust the air pressure of the lower air duct (to the cyclone) to about 0.05-0.1 MPa (depending on the delivery distance). Then the sprayer opens the nozzle valve and gives the wet rock surface. At this time, the operator can start the machine and start shotcreting. Now the working pressure is about 0.2-0.4 MPa. According to the water-cement ratio of mixtures and the length of conveying distance, after adjusting and determining the wind pressure to the cyclone, the upper air pipe valve is opened again until there is no more material leakage at the machine outlet.

Henan Tytion Machinery Co. , Ltd was established in 2003. Now it owns total assets over 3 million RMB with 90 staff including 20 professional technicians and 12 engineers. Engineers with the college degree take up more than 70% of the total staff number. The company has new modern standard workshop of 16,000 m². We are with an eye to machinery supply service, like: construction machine; agriculture machine; grain and oil process machine business. Until now, Tytion company serves over 200 different countries clients.
Henan Tytion Company analyze the market requirements and adjust the market strategy to extended to whole turnkey project. Our goal is to supply the customers with suitable price ratio products, help the customers create new growth engine and value and provide a full range of engineering solutions.

Q: Are you original manufacturer?
A: Yes, Henan Tytion Machinery Co., Ltd was established in 2003.

Q: Which payment terms are available to us?
A: T/T term or L/C term. On T/T term, 30% down payment is required in advance, and 70% balance shall be settled before shipment. On L/C term, a 100% irrevocable L/C without "soft clauses" can be accepted.

Q: Which Incoterms 2010 terms can we work?
A: Henan Tytion Machinery is a professional and international company, accept all Incoterms 2010 terms, normally we work on FOB, CIF, CFR, CIP

Q: How long will the delivery time take?
A: Normally it will take about 30-40 days to produce the ordered machines.

Q: How about your sales performance in China?
A: We have more than 1500 active customers in China. The leading market share of same function products in domestic fields.