- Product Details
- {{item.text}}
Quick Details
-
Place of Origin:
-
Guangxi, China
-
Brand Name:
-
DAXIN
-
Model Number:
-
M15-3
-
Diameter:
-
15.2mm
-
Name:
-
12 Holes Foundation Concrete Lifting Wedge Lift Anchor Sleeve Anchors
-
Material Wedge:
-
20CrMnTi
-
Material Head:
-
40Cr
-
Bearing Capacity:
-
25~4033HRC (306 HBS)
-
Standard Size:
-
15.24mm
-
Length:
-
48-100mm
-
Executive standard:
-
GB-T14370-2007
-
Packaging Details:
-
50sets in plastic bag then put in the strong paper box for 250sets
-
Delivery:
-
5-10 working days
-
Application:
-
Bridge, Railway, Highway, Building
Quick Details
-
System of Measurement:
-
Metric
-
Material:
-
40Cr
-
Capacity:
-
2000Mpa
-
Place of Origin:
-
Guangxi, China
-
Brand Name:
-
DAXIN
-
Model Number:
-
M15-3
-
Diameter:
-
15.2mm
-
Name:
-
12 Holes Foundation Concrete Lifting Wedge Lift Anchor Sleeve Anchors
-
Material Wedge:
-
20CrMnTi
-
Material Head:
-
40Cr
-
Bearing Capacity:
-
25~4033HRC (306 HBS)
-
Standard Size:
-
15.24mm
-
Length:
-
48-100mm
-
Executive standard:
-
GB-T14370-2007
-
Packaging Details:
-
50sets in plastic bag then put in the strong paper box for 250sets
-
Delivery:
-
5-10 working days
-
Application:
-
Bridge, Railway, Highway, Building
Wedge :
Raw material grade is 20CrMnTi , there are two types : 2 and 3 parts . widely suit for 12.70 and 15.24mm anchorage.
it can produced by your drawing or samples , and samples for your testing freely.
Sliped ?
Main reasons you can find :
1)Production technology :
Hardness too high, brittle;
carburization controlled by heat treatment to make the core soft and surface hard , make it tough hardness.
2)Raw material: raw material quality ,internal organizational structure and chemical .
3)The angle suit for anchor head.
4)There are no rust and Debris （sand…) in the anchor head hole’s inside and teeth of wedge .at the same time the PC Strand no
rust.
Main reasons you can find :
1)Production technology :
Hardness too high, brittle;
carburization controlled by heat treatment to make the core soft and surface hard , make it tough hardness.
2)Raw material: raw material quality ,internal organizational structure and chemical .
3)The angle suit for anchor head.
4)There are no rust and Debris （sand…) in the anchor head hole’s inside and teeth of wedge .at the same time the PC Strand no
rust.
Anchor head:
Raw material grade is 40Cr, which is better than 45# . holes number from 1-55 .
Heat treatment to control hardness.
it can produced by your drawing or samples also , carve your brand letters .
1) Production Days :
7-25 days . depend on normal type or customized type .
2) Quality guarantee:
return your payment if any quality problem happen.
3) After sales service: whenever you need , our engineer will give you professional support by facetime or viedos.
4) For machines: there is instructions in english , operating video supporting your any doubt.
3) After sales service: whenever you need , our engineer will give you professional support by facetime or viedos.
4) For machines: there is instructions in english , operating video supporting your any doubt.
Hot Searches
