motion detector ST11 outdoor water proof infrared PIR motion sensor wall light switch

Welcome to read ST11 Infrared motion sensor!

Professional Wireless Modern Long distance ST11 motion detector infrared PIR motion sensor wall light switch

The product adopts good sensitivity detector and integrated circuit. It gathers automatism, convenience, safety, saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source and it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely.

SPECIFICATION:

Power Source: 11 0 - 13 0V/AC   220 -240V/AC Detection Range: 180°

Power Frequency: 50/60Hz                                   Detection Distance: 12m max(<24℃)

Ambient Light: <3-2000LUX (adjustable)               Working Temperature: -20~+40℃

Time Delay: Min.10sec±3sec                                Working Humidity: <93%RH

Max.15 min±2min                               Power Consumption: approx 0.5W

Installation Height: 1.8-2.5m                                Detection Moving Speed: 0.6-1.5m/s

Rated Load:  110 -130V/AC :                           220 -240V/AC :

500W(incandescent lamp)            800W(incandescent lamp)

200W(energy-saving lamp)          400W(energy-saving lamp)

Lifetime and Warranty:

FUNCTION:

Ø  Can identify day and night: The consumer can adjust working state in different ambient light. It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on the “3” position (min). As for the adjustment pattern, please refer to the testing pattern.

Ø  Time-Delay is added continually: When it receives the second induction signals within the first induction, it will restart to time from the moment.

CONNECTION:

Ø  Loosen the screw in the back and unload the bottom (refer to figure 1).

Ø  Find the wire hole with gasket in the downside of the sensor and pass the power wire through hole. Connect the power wire into connection-wire column according to the connection-wire diagram.

Ø  Fix the bottom with inflated screw on the selected position. (refer to figure 2)

Ø  Install back the sensor on the bottom, tighten the screw and then test it.

CONNECTION-WIRE DIAGRAM: (See the right figure)

SENSOR INFORMATION:

PRODUCT CAPACITY:

Our company adopts automatic machines,such as:SMD,auto component inserter,wave solder,auto injection machine and so on.And the daily output is up to 20000~30000pcs.

CERTIFICATE:

The concept of our company is"advocating new modern living environment",which focuses on researching and developing the contemporary household intelligent product.Our product can be truly satisfied for different customer's requirement,most of them are available with CE GS ROHS R&TTE REACH certification .