1. The vehicle shall not exceed the rated capacity specified by the manufacturer when in use.
2. Without the approval of the manufacturer, no design modification shall be made, nor shall any object be attached to the vehicle, so as not to affect the capability and operation safety of the vehicle.
3. Modifications caused by the replacement of different component configurations (such as battery packs, tires, seats, etc.) shall not reduce safety and meet the requirements of this specification.
二、 Driving Road:
1. The road must have carrying capacity, and the maintenance must be strengthened so that it does not affect the operation safety
of the vehicle.
2. The driving road of the vehicle must have a visual field and easy to turn, no slopes, steep slopes, narrow passages and low roof.
3. Where pedestrians or other vehicles are likely to be encountered, the road must be wide enough.
4. It is recommended that the slope of the road not exceed 25%, and the top and bottom of the slope must be smoothly transferred to avoid collision between the bottom of the vehicle and the road. When the slope exceeds 25%, it is recommended to install signage. At this time, the vehicle must be driven with extreme caution.
1. The road must have carrying capacity, and the maintenance must be strengthened so that it does not affect the operation safety
of the vehicle.
2. The driving road of the vehicle must have a visual field and easy to turn, no slopes, steep slopes, narrow passages and low roof.
3. Where pedestrians or other vehicles are likely to be encountered, the road must be wide enough.
4. It is recommended that the slope of the road not exceed 25%, and the top and bottom of the slope must be smoothly transferred to avoid collision between the bottom of the vehicle and the road. When the slope exceeds 25%, it is recommended to install signage. At this time, the vehicle must be driven with extreme caution.
