5V 12V 85-220V 9-35V 1/4' 1/2' 3/4' 1' Ball Electric Motorised Motor Operated Control Valve for Irrigation

5V 12V 85-220V 9-35V 1/4' 1/2' 3/4' 1' Ball Electric Motorised Motor Operated Control Valve for Irrigation

Data Sheet

Schematic & Dimension

CR01(two wires and reverse polarity )Voltage:DC3-6V/12V/24V

1.Connecting SW to OPEN , the valve opens , getting the position ,automatically power off, the valve remain fully open position
2.Connection SW to CLOSE , the valve close , getting the position ,automatically power off, the valve remains side passes position(fully closed)

CR02 (three wires two point control) Voltage:DC3-6V/12V/ 9-24V/AC24V/AC220V

1.Connecting SW to OPEN, the valve opens , getting the position ,automatically power off, the valve remain fully open position

2.Disconnecting SW to CLOSE, the valve close , getting the position and automatically power off, the valve remains fully close position

Note:AC24V/AC220V can only be used for CWX-50K series electric valves

CR03(three wires one point control)Voltage:DC3-6V/12V /ADC9-24V /AC220V

1.Connecting SW, the valve opens , getting the position ,automatically power off, thevalve remain fully open position
2.Disconnecting SW, the valve close , getting the position ,automatically power off, the valve remains side passes position (fully closed)
Note:When power is DC voltage and Red Wires is “+”,Blue wire is “-”

CR04(two wires and fail-safe/power-off return) Voltage:DC3-6V/ADC9-24V/AC220V

1.SW connecting ,the valve open, getting the position and the power off automatically,the valve remains fully open/close position
2.SW disconnecting ,the valve close, getting the position and power off automatically,the valve remains fully open/close position

CR05 (five wires micro controller with signal feedback)  Voltage:DC3-6V/12V/24V

1.Connecting SW and OPEN , the valve opens , getting the position green wire output the OLS signal , the controller test the signal OLS, connect SW to STOP, the valve stops and remains fully open position

2.Connecting SW and CLOSE , the valve close , getting the position red wire output the CLS signal , the controller test the signal CLS, connect SW to STOP, the valve stops and remains fully close position,
Note:Please make sure the signal wires "red","black" and "green" be connected at first,then connect the power wires " yellow" and "blue"

CR01S Wiring Diagram (five wires with feedback)   Voltage DC3-6V

1.Connecting SW to OPEN, the valve opens, getting the position, automatically power off, the valve remain fully open position, meanwhile output open position signal
2.Connecting SW to CLOSE, the valve close, getting the position, automatically power off, the valve remains fully close position, meanwhile output close position signal

CR02S(six wires with feedback)  Voltage DC3-6V

1.Connecting SW to OPEN, the valve opens, getting the position, automatically power off, the valve remain fully open position, meanwhile output open position signal
2.Connecting SW to CLOSE, the valve close, getting the position, automatically power off, the valve remains fully close position, meanwhile output close position signal

CR03S(six wires with feedback)  Voltage DC3-6V/ADC9-24V/AC220V

1.Connecting SW, the valve opens, getting the position, automatically power off, the valve remain fully open position, meanwhile output open position signal
2.Disconnecting SW, the valve close, getting the position, automatically power off, the valve remains fully close position, meanwhile output close position signal
Notes: When power is DC voltage and Red Wires is “+”, Blue wire is “-“

2,000 valves per day will be tested, packaged, rigged and prepared for shipment

Delivered to customers safely with the highest speed, efficient and fast transportation