- Product Details
- {{item.text}}
Quick Details
-
Brand Name:
-
JIHANG
-
Output power:
-
232-696 KW
-
Control mode:
-
Fully automatic two-stage flame control
-
Applicable fuel:
-
Waste oil/Diesel oil/Tire oil(Flash point below 80)
-
Fuel consumption:
-
10-30kg/h
-
Applicable power supply:
-
AC220V/50Hz/1O
-
Main Body Size of Burner:
-
750*600*330
-
Motor power:
-
0.37 KW
-
Burner weight:
-
19 kg
-
After Warranty Service:
-
Video technical support
Quick Details
-
Type:
-
Oil Burner
-
Weight (KG):
-
19
-
Place of Origin:
-
Hebei, China
-
Brand Name:
-
JIHANG
-
Output power:
-
232-696 KW
-
Control mode:
-
Fully automatic two-stage flame control
-
Applicable fuel:
-
Waste oil/Diesel oil/Tire oil(Flash point below 80)
-
Fuel consumption:
-
10-30kg/h
-
Applicable power supply:
-
AC220V/50Hz/1O
-
Main Body Size of Burner:
-
750*600*330
-
Motor power:
-
0.37 KW
-
Burner weight:
-
19 kg
-
After Warranty Service:
-
Video technical support
Waste oil burner with air compressor for Bakery ovenSteam boiler from China mailland
The waste oil burner uses air to atomize the waste oil, and then ignites the oil through the electronic igniter and fully burns it.
| Technical parameters | ||||||
| Model | JH-10-WY | JH-20-WY | JH-30-WY | JH-40-WY | JH-60-WY | |
| Output power | KW | 46-116 | 81-197 | 116-350 | 174-464 | 232-696 |
| 104Kcal/h | 4-10 | 7-20 | 10-30 | 15-40 | 20-60 | |
| Control mode | Fully automatic single stage flame control | Fully automatic two-stage flame control | ||||
| Applicable fuel | Waste oi/Diesel oil/Tire oil( Flash point below 80) | |||||
| Fuel consumption | kg/h | 9.5 | 19.1 | 28.5 | 38.1 | 57.1 |
| Standard inlet pressure | Pa | 0 | ||||
| Adaptable pressure range | MPa | 0.6-1.2 | ||||
| Design fuel calorific value | Kcal/Nm³ | 10500 | ||||
| Adapt to ambient temperature | ℃ | -15~60 | ||||
| Applicable power supply | AC220V/50Hz/1O | AC380V/50Hz/3O | ||||
| Motor power | KW | 0.18 | 0.18 | 0.37 | 0.75 | 1.1 |
| Safety Protection Level | IP | 44(The protection level can be improved according to the order requirement.) | ||||
| Flange Installation Form | Sliding adjustable flange | |||||
| Fuel access port size | 1/2 | |||||
| Main Body Size of Burner (Length * Width * Height) | mm | 530*450*300 | 530*450*300 | 750*600*330 | 1130*700*480 | 1250*840*570 |
| Burner weight | kg | 11 | 12 | 19 | 50 | 59 |
Advantages:
1. This burner is equipped with a pneumatic solenoid valve , which can automatically control the waste oil into the oil tank. When the oil volume in the oil tank is lower than the lowest position, it can automatically refuel. When it reaches the highest position of the oil tank, it can stop refuelling, which is convenient and flexible.
2. Customers can also customize the remote control port to meet the diversified needs of customers.
3. It can burn tire oil , waste oil and other low-cost oil , greatly reducing the cost of customers.
4. It is connected with the air compressor , so that the atomization is more sufficient and the combustion is more thorough, which greatly reduces the time for manual cleaning of the nozzle in the later stage.
Note :
When customers choose waste oil burner, please inform our customer service of several characteristics of this fuel, such as calorific value, viscosity, flash point, etc. If not clear, you can contact our customer service to help you confirm to ensure that you can use it normally after purchase.
Product Display
