Long life high quality custom grease High temperature grease

Shandong Dongying Fuchs Petroleum Technology Co., Ltd. is located in the beautiful and rich Yellow River Delta, and Shengli Oilfield is located in Dongying City. It is a large petrochemical enterprise with nearly 20 years of history specializing in the production of lubricating grease and various petrochemical products. It has an international leading level of lubricating grease production line and scientific research center, It is a pioneer in the field of grease production. Flowserve grease manufacturers and agents are all over the country, providing customers with all-round professional grease production solutions. At the same time, the company is engaged in the research, development, production, sales and service of lithium-based grease, high-temperature grease, 000 semi fluid grease, molybdenum disulfide grease, MPEP grease, thread sealing grease, wire rope surface grease, white food machinery grease, conductive grease and special high-grade lubricating oil (grease). The company's grease products are widely used in auto parts, precision bearings and machines Electrical products, special assembly parts. Our products have passed a number of EU environmental protection certification, and enjoy a high reputation and good reputation in the field of lubricating oil and grease in China.

The lubricating grease shall have the following properties:

1.It can withstand high temperature of 200-800 ℃ without oil separation, low temperature of - 60 ℃ without frozen lump, and the viscosity remains unchanged;
2.Under high temperature and high speed, the wear of gears and bearings is reduced by 70%, and the maintenance cost of lubricating parts is saved;
3.The lubrication cycle can be up to 6 ~ 12 months;
4.Good compatibility with most plastics and metals;
5.Excellent corrosion resistance, super adhesion, excellent rust and water resistance;
6.Excellent bearing capacity and wear resistance, long-term reduction of working noise;
7.Perfectly fill the gap between valve body and seal of pneumatic valve and cylinder piston to improve lubrication and sealing;
8.The consistency changes very little with temperature and the volatility is very low.

Storage matters:

1. Grease is a colloid. The structure of grease will be affected by various external factors during use and storage.

2. When stored in the warehouse, the temperature should not be higher than 35 ℃, and the packaging container should be sealed without leakage of water and foreign impurities.

3. When the sample or product is taken from the barrel, do not leave holes in the packaging barrel. The surface of the grease after taking the sample should be smoothed to prevent pits. Otherwise, the base oil will be squeezed by natural gravity and penetrate into the pits left by sampling, which will affect the quality of the product.

Use matters:

1. The dosage should be appropriate
Please add grease according to the demand of lubricating parts. If the amount of grease is too large, the friction torque will increase, the temperature will increase, and the grease consumption will increase; If the amount of grease is too small, reliable lubrication cannot be obtained and dry friction occurs.

2. It is forbidden to mix different brands of grease
Because the thickener, base oil and additives used by different greases are different, for example, the mixed use may change the colloidal structure, increase the score of oil, change the consistency and mechanical stability.

3. Pay attention to the management of grease change cycle and use process
Fill and replace lubricating grease regularly according to the grease requirements of lubricating parts. When adding and replacing new grease, squeeze out the waste grease until new grease is seen at the grease outlet. The greasing process must be kept clean to prevent the mixing of mechanical impurities, dust and sand particles.