Loctiter 243 242 271 272 277 263 anti-looseness fastening anaerobic glue high temperature

Notes 1. This product is not suitable for use in pure oxygen/oxygen-rich environment, can not be used as chlorine or other strong oxidizing substances of the sealing material. 2. Before bonding, to use water-based cleaning solution to clean the surface of the occasion, it is important to check the compatibility of cleaning solution and glue. In some cases, water-based cleaning solutions may affect the cure and performance of the glue. 3. This product should not be used on plastics, especially Thermoplastic that may cause stress cracking. It is recommended that the compatibility of this product with the material to be bonded be confirmed before use. Four. The coated surface should be clean and dry without grease, if necessary, choose lotai cleaning agent and accelerant, the effect is better. Apply enough glue on the bolt to fill all the meshing thread, this product in 0.05 mm below the thin glue layer work better. For very large thread size, the larger the gap will affect the product curing speed and strength. This product will reduce assembly friction (torque-tension ratio) , in the need to tighten the thread to the critical value of the application, the need to determine the ratio in advance.