Original Keyence Cv-5501p Cv-5502 Digital Image Sensor Controller

Model

CV-5501P / CV-5502

Type

Controller

No. of pixels

When CV-200C/S200C/H200C/200M/S200M/H200M is connected 2 megapixel mode: 1600 (H) × 1200 (V), Approx 1,920,000 pixels 1 megapixel mode: 1024 (H) × 960 (V), Approx 980,000 pixels When CV-H100C/H100M is connected 1 megapixel mode: 1000 (H) × 1000 (V), Approx 1,000,000 pixels When CV-035C/S035C/H035C/035M/S035M/H035M is connected 240,000 pixel mode: 512 (H) × 480 (V), Approx 240,000 pixels 310,000 pixel mode: 640 (H) × 480 (V), Approx 310,000 pixels

Camera input

Two colour/monochrome
cameras (Compatible
with CV-H200C/200C/
S200C/H100C/035C/
S035C/H035C/200M/
S200M/H100M/035M/
S035M/H035M, mixed
connection possible)
Two extra cameras can
be connected by using
expansion unit CV-E500.
Up to four
cameras can be
connected.

Main processor for image processing

DSP (High-speed)

No. of registered settings

SD cards 1 and 2 can each hold 1000 programs (depending on the size of the SD
card and the size of the programs), external switching possible

Number of screens that can be registered

Maximum 1000 screens for each program (depending on SD card size),
Compressed saves possible

Internal memory capacity

SD card slot x2 (SDHC compatible)
Compatible with OP-87133 (512 MB: standard in SD1 slot for CV-5501/5001),
CA-SD1G (1GB: standard in SD1 slot for CV-5701), CA-SD4G (4GB: SDHC)

Window
settings

Measurement area

128 locations per program

Mask area

4 locations per area

Colour extraction function (valid only when a colour camera is connected)

Colour binary, colour shade, Gray, RGB average gray (Colours can be specified
numerically via HSV values)
Compatible with 1:n copy

Measurement
tool

Area measurement

The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon (up to 12
sides), edge detection rectangle area or edge detection circular area

Position detection

Pattern search

Multiple searches possible for both pattern area and search area. The shapes are
rectangle, rotated rectangle, circle, oval, ring, arc, and polygon (up to 12 sides)
Pattern area can be masked (4 positions / area)

V-search

Up to 256 patterns can be searched simultaneously for both pattern area and
search area. The shapes are rectangle, rotated rectangle, circle, oval, ring, arc,
and polygon (up to 12 sides)
Pattern area can be masked (4 positions / area)

ShapeTrax2

Profiles for both pattern areas and search areas: rectangle, rotating rectangle, circle, ellipse, ring, arc, polygon (up to 12 angles) Multiple searches are supported. Pattern area masks (4 locations/area, multiple figure masks present) are supporte

Edge position

Angles can be measured. The shapes are rectangle, rotated rectangle,
circle, oval, ring, arc or polygon (up to 12 sides), edge detection rectangle
area or edge detection circular area

Trend edge position

Circle or straight line can be measured from the detection results
Shapes are rectangle, rotated rectangle, ring and arc

Blob (Centre of gravity)

The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon (up
to 12 sides), edge detection rectangle area or edge detection circular area

Inspection mode

Edge position

Edge pitch

Edge count

Edge angle

Shape is rectangle.

Pair edge

The shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to
12 sides), auto-adjusting rectangle or auto-adjusting circular area

Trend edge width

Shapes are rectangle, rotated rectangle, ring and arc

Blob (characteristic quantities)

Labels, center of gravity, main axis angle, area, feret diameter, perimeter,
roundness
The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon
(up to 12 sides), edge detection rectangle area or edge detection circular area

Stain detection

Subtract stain detection by using subtract filter
Stain grouping function supports multiple stain detection and position
measurement
The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon
(up to 12 sides), edge detection rectangle area or edge detection circular area
Supports measurement of the colour image using fine colour

Trend edge flaw

The shapes are rectangle, circle, oval, ring, arc, and polygon.
Supports flaw detection using straight lines, circles, ovals, and free-form
straight lines as reference models.

Intensity inspection

The shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to
12 sides), auto-adjusting rectangle or auto-adjusting circular area

Colour (only when a Colour camera is connected)

RGB and HSB measurement supported
The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon
(up to 12 sides)

Geometry

Calculation result can be reflected
Shapes are point, line, and circle

OCR

Character recognition for max. 2 lines of 20 characters per line
Shape is rectangle
Built-in date/time encryption support function

Interface

Control input

External trigger input

2 points
EV compatible input
rating: 26.4 V or less, 3
mA or more
2-camera simultaneous
capture/individual capture
can be selected.
Individual trigger delay (0 to 999 ms) can be selected for each trigger input

Control input

18 inputs
Input rating 26.4 V or less, 2 mA or more

Control output

Universal output

27 (including 2 FLASH outputs that work with an external trigger), maximum NPN open-collector output: 50 mA (30 V or less)

Total comparator output

1 output, NPN open collector, maximum 50 mA (30 V or less)
Supports total status hold control and one shot output (1 to 9999 ms)

Monitor output

SVGA 800x600 (24-bit colour 60 Hz)

Run indicator

Power, Error LED display

RS-232C

Numerical value output, image data (compressible) and control input/output
enabled. Can be used simultaneously with other communication ports.
Maximum baud rate of 115200 bps is supported.
Do not use to connect to PLC link, CC-Link, or EtherNet/IP ^TM

Ethernet

Numerical value output, image data (compressible) and control input/output enabled.
Can be used simultaneously with other communication ports.
100BASE-TX/10BASE-T

USB

Numerical value output, image data (compressible) and control input/output
enabled. Can be used simultaneously with other communication ports
USB2.0 HI-SPEED compatible

PLC link

Numerical value output and control input/output using the RS-232C port or
Ethernet port enabled.
Following PLCs are supported via link unit ^*1 :
KEYKENCE CORP.: KV-700 series, KV-1000 series, KV-3000 series, KV-5000 series,
KV-5500 series
Mitsubishi Electric: A series (RS-232C only), Q series, L series
OMRON: SYSMAC C series (RS-232C only), CJ/CJ1 series
Yaskawa Electric: MP900 series (RS-232C only)/MP2000 series
Do not use to connect to CC-Link, RS-232C, or EtherNet/IP ^TM

CC-Link

By connecting the optional CC-Link unit CA-NCL10E, numerical value input/
output and control input/output are enabled.
Supports remote device station, Ver. 2.00/1.10
Do not use to connect to PLC link, RS-232C, or EtherNet/IP ^TM

EtherNet/IP ^TM

Numerical value input/output and control input/output enabled while using an
Ethernet port
Supports periodic communication (Max. 1436 bytes), supports message
communication
Up to 128 units can be connected
Compliant with compliance test Version.A5