2023 Newest coatings powder cars green gold pearlescent for candy colors pigments rainbow pigment car paint for spray

Available Powder Types

Available Colors

1. Epoxy powder coating

1. RAL Colors

2. Polyester Powder Coating

2.Pantone Colors

3.Epoxy-Polyester Powder Coating( Hybrid)

3.Customer color matching

4.Polyurethane Powder Coating

Available finish

5.Heat transfer printing powder coating

1. Smooth

Available gloss level

2. Rough( Sand texture )

1. High gloss( Above 80%)

3.Wrinkle( fine texture )

2. Flat gloss (50%-80%)

4.Antique( hammer tone)

3. Semi gloss(5%-50%)

5.Metallic

4. Matt ( below 5%)

6.Other special effect ( artistic)

Bad symtoms

Possible Cause

Solution

1.With low power, powder

coating is not easy to coated;

1. High voltage power supply shortage;

1. Check the circuit

2. Grouding is bad;

2. Remove clutter grouding line

3. Compressed air volume is too big,

the powder to blow fell &blows away;

3. Spray appropriate isolation,

reduct air convection;

4. Powder particle size is too thin;

4. Add new powder coating, reduce the

recovery powder consumption.

5. The air temperature is too high;

5. Powder particles with air water

branch of low power, control

temperature of spray area;

2. Charge repulsion powder

repboud from the working

surface;

1. The voltage is too high;

1. Lower voltage and air volume;

2. Spray gun from the work location is

too close;

2. Extend the spray gun and artifacts;

3. Grouding is bad;

3. Remove clutter grouding line;

4. Powder particle size is too thin, not

esay to attach to the workpiece surface;

4. Add new powder coating, reduce

the recovery powder consumption;

3. Corner not easy spraying

penetration is bad;

1. The powder amount is too small;

1. Lower voltage and air volume,

increasing the amount of powder;

2. Grouding is bad;

2. Adjust the spray gun position;

3. The voltage is too high;

3. Choose small backboard, proper nozzle;

4. Spray gun position is not good;

4. If the corner is more and deeper, then

consider friction gun equipment;

5. Powder spraying range is too wide;

4.Powder  spraying uneven

1. Air pressure is insufficient;

1. Cleaning pipeline, spray gun and flowmeter;

2. Line fault block;

2. Check the air supply, Exclude water vapor

in powder agglomeration;

3. Block in the spray gun;

3. If powder agglomeration, to screen or

change new powder coating;

Card Types

Color Category

1. RAL Cards

213 kinds of colors

2. PANTONE  Cards

1690 kinds of colors

3. FRD  Cards

360 kinds of  colors

Application Area

1. Household Applications

7.  Used for Security Door;

2. Car Coating

8.  Radiator & Heat Sink;

3. Used for Valve

9.  Corrosion Prevention of Pipes;

4. Track Traffic

10. Communications Equipments;

5. Aerospare field

11. Hardware & Brightwork;

6. Fitness Equipment