We Sinooutput in marine filed since 1958, can according to your actual use help you produce winch.
Type A:
Only for anchor and anchor chain
Type B
Can be used for anchor chain and steel rope together
Type C
Can be used for anchor chain, steel rope, nylon together and fishing net(optional) together
That can help you operate easier on your deck and help you save space
When you inquiry the anchor winch, just need tell us:
1. Your anchor weight 2. Your anchor chain diameter
If you need the winch for steel rope together, please let us know:
1. your rope diameter 2. your rope length
Welcome to inquiry!
|
|
Name
|
Sino-Winch-24
|
|
1
|
Anchor chain diameter
|
24mm
|
|
2
|
Working load
|
24.48 kN
|
|
3
|
Overload pull
|
36.72 kN
|
|
4
|
Supporting load
|
149.4kN
|
|
5
|
Nominal speed
|
≥9m/min
|
|
6
|
Anchoring depth
|
≤82.5m
|
|
7
|
Reel load
|
15kN
|
|
8
|
Hydraulic motor
|
JMDG6-700B
|
|
9
|
Oil pump
|
40SCY14-1B
|
|
10
|
System working pressure
|
8.2MPa
|
|
11
|
Adjusted pressure of Safety valve
|
13.5MPa
|
|
12
|
System flow
|
60L/min
|
Name: Gear reducer
The hydraulic anchor winch gear reducer adopts open gear transmission, The system has the advantages of high efficiency, large bearing load and easy lubrication, etc. Passive gear will transfer the power to the shaft of anchor wheel.
Name:
Pedestal
The pedestal consists of the foundation and thebracket. Bracket is mainly used for supporting wheel axis and clutch device, support radial load when the anchor winch
working. The foundation is installed on the hull, so that the machine can be installed on the deck as a whole because of the installation requirement.
Name:
Clutch
The clutch is used to control the separation and closing of the jaw clutch. When weighing anchor ,controlthe clutch handle of anchor drumto close the clutch,disengage the clutch of mooring drum;When mooring,disengage the clutch of anchor drum ,close the clutch of mooring drum.
Name:
Brake
The brake device can be controlled by hydraulic control and manual control,hydraulic control:open the corresponding three way ball valve which is next to the brake, start the pump group, the brake is opened;Manual control:through the control of the brake wheel, turn the brake screw to achieve brake open and close.
The drum device mainly consist of drum, big gear, jaw clutch, warping end, main shaft,etc. The drum sheathed on the main shaftis used for retracting anchor chain/cable;The big gear andjaw clutch are used to transfer power,the drum is used for retracting cable,the main shaft is used to bear the load.
Name : Power unit
Power unit consists of tank, motor driven hydraulic pump etc. The oil tank is welded with steel plate, the tank is provided with a partition board, and the inlet and the outlet are separated.The oil tank is provided with a hydraulic pressure indicator, and a return oil filter is arranged on the oil tank;The electric motor and the oil pump are positioned below the oil tank, connected with an elastic coupling, they provide pressure oil for the hydraulic motor of the anchor winch.
|
Tube diameter
|
Space of tube clamps
|
|
10~25
|
≤1500
|
|
>25~50
|
≤2000
|
|
>50~80
|
≤3000
|
|
>80~120
|
≤4000
|
1,
Power to weigh and drop anchor
(1) Start the electric oil pump group
(2) Close the clutch of anchor drum
(3) Loosen the brake(Automatically open when hydraulic control)
(4) Operate manual / solenoid directional control valve to the weigh and drop anchor position.
2
,Power to mooring
(1) Start the electric oil pump group
(2) Close the clutch of mooring drum
(3) Loosen the brake(Automatically open when hydraulic control)
(4) Operate manual / solenoid directional control valve to do mooring work.
Company Name: SINOOUTPUT Plant(Shanghai)Ltd.
Operational Address: 3-2503, Wanda, No. 4995, Gonghe New Road, Baoshan Dist., Shanghai, China(Mainland)
Website: http://www.sinooutput.com http://www.sinooutput.en.alibaba.com
91.8% Response Rate
91.8% Response Rate
91.8% Response Rate
