Portable flashlight 12v jump start powerbank car power bank jump start 69800mah car starting jumper

1. Super compact ultra thin portable jump starter easy to take outside for travel and journey.

2.Over charging protect, overdischarge protection, overcurrent protection, shortcircuit protection.
3.Our car jump starter with high-temperature resistance, can keep under 60℃ temperature.
4.No fire and no explosion after extruding, crashing, high security for car jump starter using.
5. Long cycle life more than 1000 times.

Shenzhen Shengshi Tianhe Electronic Technology Co., LTD. was founded in 2002 and factory has over 8000 square meters. At the end of 2017, the company have 500 employees, including technical research and development and management staff more than 65 peoples.

SZSSTH are hi-tech enterprise which is engaged in R&D, production, sales and service of power inverter, solar hybrid generator systems, solar panels, solar power system, solar inverter, solar controller, universal laptop adapter, car charger, intelligent power , UPS power , switching power and so on. All products can pass TUV, UL, CE, SGS, ROHS, REACH, PAHS and others certificate.

Our products are exported to many countries and regions such as Eurasian, North and South America, Middle East and Africa.

1 ) Which function do start power supply have?

the starter power is mainly used to charge the portable electronic devices,such as mobile smart phone,tablets,portable gaming and any other DC 5V powered electronic devices.It can also jump start a drained car battery with the jump starter cables.There's also an included ultra-bright LED light that can be used as a flash light or SOS signal flashing light.

2) How can LED emergency lighting be turns on?
Turn master switch of start power to "ON" and press"power button" for 3 seconds to start flashlight function. Afterwards, press "power button" LED function to turn normal on to flickering,SOS distress signal light; press "power button" to directly turn it off.

3) The start power supply has 19V and 12V output functions, how can V number be switched?
The start power supply can guarantee several V number selection. Before charging with start power supply,press "power button" for short time to switch among different V numbers and corresponding indicator light are normally on, Different products use different voltage, eg.: laptop generally have 19V and 16V. Before use, please confirm products V number.

4) How can an auto be started?
If an auto can not be started by the storage battery because of various reasons,the start power supply can exert supernatural effects.At first ,inspect electrical quantity of start power.Generally,the auto can be started when there is one check display of indicator light. Connect positive and negative polarities of storage battery with positive and negative polarities of storage battery. After red polarities and black polarities are clamped,insert plug of battery terminal into start outlet of start power,turn auto key to start auto. After start the auto,remove clamps from battery.

5) Will reversing polarity connections of the jump start cable damage the vehicle?
No,the start power is very safe with comprehensive protection, If you accidentally connect the red and black cable clamps to the wrong polarity terminal and attempt to jump start the vehicle,the fuse will be blown and will cut the power immediately to prevent injury and avoid damaging the vehicle.

6) What if it doesn't jump start the vehicle?
If the start power fails to jump start the engine,please wait at least 10 seconds before attempting to try again,it is also highly recommended to replace the vehicle battery once every 2 or 3 years.

7) How many times can the start power jump start a vehicle?
Approximately 20 times with a 100% fully charged battery.Results may vary depending on owner usage and vehicle engine displacement.

8) How can start power supply be charged?
Turn product switch to "ON", Use home adapter or Car adapter connected to 220V(110V-240V) commercial power or 12V car power supply,product will begin to charged. the indicator light will be flash all time. when four indicator light are on,it indicates the power supply has been full charged!

9) How long will it take to fully charge the start power to max capacity?
5-6 hours.Depending on the current battery charge indicator.

10) How long is he start power's standby time?
The typical standby time of the start power is 3 months fully charged.It is recommended to charge the start power once every 3 months to prolong its service life.Result may vary depending on owner usage.