iFlight BLITZ F7 Pro Combo Set with BLITZ E80 Single ESC BlHeli32 Dshot600 for RC FPV Racing Drone

BLITZ F7 PRO FC Features:

• Improved circuit design, better components, and lower electrical noise!

• DJI HD VTX Connector (Plug-and-Play / No soldering required)

• FC indicator LEDs for visual debugging

• 512MB BlackBox

• With LC filter

Specifications

• Mount pattern: 35*35mm/ 4mm PCB hole diameter

• Smartaudio / IRC Tramp VTX protocol supported

• Firmware target: IFLIGHT_BLITZ_F7_PRO

• Input Voltage: 14.8V-34V (4S-8S LIPO)

• Motor outputs: 4x (SH1.25 connector)

• Flash: 512MB (Blackbox flash)

• I2C serial: SDA / SLA pads

• Dimensions: 41*41.5mm

• Barometer: DPS310

• OSD Chip: AT7456E

• LED controller: Yes

• MCU: STM32 F722

• Weight: 17g (±2)

• Beeper pad: Yes

• Gyro: BMI270

• UARTS: 4

BLITZ E80 4-IN-1 ESC Description:

• The MOSFET used by BLITZ E80 is PSMN1R0-40YLD, which can withstand a continuous current of 80A at 25°C, with a maximum power dissipation of 198W. BEC power supply adopts TI automotive-grade dedicated synchronous rectifier chip, supporting up to 100V.

• The 1-4 layer power board of the PCB circuit is ultra-thick copper with a thickness of 4OZ, ensuring continuous output under high-power operation. The STM32F051 main control processor with a running frequency of up to 48MHz, combined with a three-in-one driver IC, achieves a faster running speed!

Features:

• Rational layout, countersunk holes on extended solder pads to ensure PCB layer connection

• G071 MCU, 48mHz maximum clock speed;

• TDK MLCC Low ESR ceramic capacitors;

• Top grade PSMN1R0-40YLD MOSFET;

• 8 layers double-sided PCB board

Specification:

• Product Name: BLITZ E80 4-IN-1 ESC

• Input Voltage: 2-8S

• Max. Continuous Current: 80A

• Max. Burst Current: 100A

• MCU: G071

• BEC: No

• Firmware: BLHeli32

• Current Sensor: Yes

• Telemetry: Supported

• Target: IFLIGHT_BLITZ_G2

• Mounting Dimensions: 35x35mm/Φ4mm

• Dimensions: 35x42mm

• Weight: 65g(±10)

• Protocal:Supports DShot DShot150/300/600/MultiShot/ OneShot etc

Package included:

• 1 x BLITZ F7 Pro Flight Controller

• 8 x BLITZ E80 Single ESC with CNC Alum Cover(optional)

• 8 x 50V 470UF capacitor(optional)

• 8 x Power cables & ESC signal wires(optional)

• 2 x BLITZ Pro PDB(optional)

• 4 x BLITZ E80 Single ESC with CNC Alum Cover(optional)

• 4 x 50V 470UF capacitor(optional)

• 4 x Power cables & ESC signal wires(optional)

• 1 x BLITZ Pro PDB

• 1 x Screws Pack

• 1 x USB Adapter Board