- Product Details
- {{item.text}}
Quick Details
-
EINECS No.:
-
201-177-9
-
Place of Origin:
-
China
-
Product name:
-
MS Polymer Sealant
-
Application:
-
Wide usage
-
Keywords:
-
MS Sealant
-
Feature:
-
eco-friendly
-
Function:
-
Sealing Gaps
-
Certificate:
-
CE ISO9001
-
MOQ:
-
1
-
OEM:
-
Available
-
Advantage:
-
100% Waterproof
-
Appearance:
-
smooth
Quick Details
-
CAS No.:
-
68928-70-1
-
Other Names:
-
MS Polymer Adhesive Sealant
-
MF:
-
C36H32Br8O6
-
EINECS No.:
-
201-177-9
-
Place of Origin:
-
China
-
Product name:
-
MS Polymer Sealant
-
Application:
-
Wide usage
-
Keywords:
-
MS Sealant
-
Feature:
-
eco-friendly
-
Function:
-
Sealing Gaps
-
Certificate:
-
CE ISO9001
-
MOQ:
-
1
-
OEM:
-
Available
-
Advantage:
-
100% Waterproof
-
Appearance:
-
smooth
Crystal clear permanently elastic formulation, High bond strength nearly on all surfaces even if slightly humid, Very good mechanical properties, Do not contain solvent, silicone, isocyanate, halogens or acids, Good extrudability even at low temperatures, Over-paintable with water-based paints, Primerless adhesion to numerous porous and non-porous substrates, No shrinkage, Does not crack or discolor
Details
| Chemical Base | AST Polymer | Curing System | Moisture |
| Density | 1.05 ± 0.03 gr/ml | Appearance/Color | Paste, Clear |
| Tack free time | 5-10 min (23°C and %50 R.H.) | Curing rate | ~ 2.7-3 mm/ 24 hr (23°Cand %50 R.H.) |
| Hardness Shore A | 35 ±5 | Elongation at break | ≥300% |
| Tensile strength | 2,17 N/mm2 | Shear Stress | 1471-1606 Pa |
| Viscosity (Pa.s) | 1440-1572 Pa.s at 25°C | Viscosity (cps) | 1440000- 1572000 Cps at 25°C |
| Heat Resistance | -20oC and +80oC | Application Temperature | +5°C to +35°C |
Product features
MS Polymer Sealant & Adhesive, Does not contain solvent, silicone, or isocyanate, Very Low VOC content, No bubble formation, even in wet and humid conditions, Very good UV resistance Over-paintable with water-based paints, No shrinkage, Does not cause oil stains in panels and porous material, Non-sag, very easy to apply, No surface tackiness
Application areas
It has a good adhesive strength without primer on most common materials, such as aluminum, zinc, galvanized steel, stainless steel, copper, natural stone, concrete, brick, etc. For crystal clear elastic bonding in construction and building applications. Invisible bonding and sealing of glass and other transparent materials in indoor applications.
Standards
Meets or exceeds the requirements of the following specifications: CE marked for EN 15651 for façade applications.
-
The requirements of VOC content specifications in LEED credit EQc4.1
-
“Low-emitting products” of SCAQMD rule 1168.
-
The French VOC requirements for class A+
-
CE marked for EN 15651 for façade & glazing applications (DOP NO: 2016-0004).
Restrictions
-
It must not be used in totally confined spaces where sealant cannot cure due to lack of atmospheric moisture.
-
Cannot be used on natural stone. Because the adhesion surface will discolor under influence of the sealant (looks wet) also this is visible through the sealant due to its clear look.
-
Do not use it in applications where continuous water immersion is possible.
-
Prolonged exposure to direct sunlight can cause discoloring, Joint Width 5mm 10mm Joint Depth 5mm Efficiency /310 ml 12 meters 6 meters
Storage and shelf life
They should be protected from water, frost, and adverse air conditions.
They should be kept dry and cool on wooden pallets at between +10 °C and +25 °C in moisture-free conditions.
The opened products should be consumed immediately.
Shelf life is maximum of 9 months conditional to complying with the aforementioned storage conditions.
Usable method
Packing Specification
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological,
toxicological and other safety-related data.
