used motor oil refining production line recycle waste engine oil to diesel

used motor oil refining production line recycle waste engine oil to diesel

used motor oil refining production line recycle waste engine oil to diesel

used motor oil refining production line recycle waste engine oil to diesel

Overview Of used motor oil refining production line recycle waste engine oil to diesel

JNC SERIES used motor oil refining production line recycle waste engine oil to diesel can be used in different kinds of black engine oil,crude oil,plastic oil and shale oil,to get diesel and gasoline through distilled catalyst.

Pump  the waste oil into the heater,and heat it to its working temperature via coal or fuel oil,gas.

The maximum working temperature is about 410 degrees.

The required diesel and gasoline can be obtained after catalytic distillation.

When the reaction of waste oil in reactor is complete,the machine will stop heating automatically,after that we can just remove the residue from the bottom of the tank and then it can be used again.

used motor oil refining production line recycle waste engine oil to diesel

used motor oil refining production line recycle waste engine oil to diesel

used motor oil refining production line recycle waste engine oil to diesel

used motor oil refining production line recycle waste engine oil to diesel

SYSTEMS OF used motor oil refining production line recycle waste engine oil to diesel

Reaction tank : used oil will be pumped into this tank from the primary filter

Heating system : by burning coal or fuel we can work the oil temperature up to setting value.This system equips with insulation system as well.

Catalytic system : used oil reaches the expected temperature,via catalytic effect,and the gaseous hydrocarbons become gasoline and diesel compositions.

Cooling system : after the catalytic effect,the gasoline and diesel compositions will be condensed into liquid materials.

Temperature control system : to make sure the waste oil transformed into gasoline and diesel.When the waste oil is dried by distillation,it can stop heating timely.

Tail gas handling system : through tail gas system,a small amount of unliquefied gas left can meet emission standards.

used motor oil refining production line recycle waste engine oil to diesel

THE RECOVERY OUTPUT RATE After Treatment By used motor oil refining production line recycle waste engine oil to diesel

Diesel:  86%-88%

Gasoline:  5%-6%

Oil Residue:  6%-8% ( which can be used as bitumen,the raw material for cement and bricks or heating fuel just as coal,after being cooled off to normal temperature )

used motor oil refining production line recycle waste engine oil to diesel

Refined Oil Coming Out Of used motor oil refining production line recycle waste engine oil to diesel

used motor oil refining production line recycle waste engine oil to diesel

used motor oil refining production line recycle waste engine oil to diesel

used motor oil refining production line recycle waste engine oil to diesel

Main Charaters Of used motor oil refining production line recycle waste engine oil to diesel

1 Working principle: used oil under the action of catalyst distillation get s high quality diesel directly.

2 No need of acid,alkali, or activated clay to refine the final diesel, just use our plate -and- frame filter ( carried with JNC) to remove the impurities.

3 The Heating Method Of used motor oil refining production line recycle waste engine oil to diesel is directly heating with fuel or gas , which is safe, convenien t , practical , and environmental-friendly.

4 The total cost of processing used oil is only USD 21 per ton (including fuel, electricity and catalyst cost).

5 Oil Output Rate : diesel 86%-88%,gasoline 5~6%,oil residue 6~8% .

6 Different from other equipment on the market :JNC used motor oil refining production line recycle waste engine oil to diesel uses a special way of heating with high thermal efficiency so that it doesn ’ t form carbon deposition easily, which greatly reduces your maintenance costs.

7 Currently on the market, the distillation is based on coil heating, due to the temperature which can’t meet the technical requirements, the oil yield only achieve to 65%.

This kind of heating mode will make it easy to scale. More importantly , it needs high temperature pump which is expensive and easily breakable . These weaknesses mean you need high cost of frequent replacement after.

8 JNC used motor oil refining production line recycle waste engine oil to diesel is safe to operate, reliable and very durable . And it ’ s easy to operate and low on labor intensity , only 1-2 workers are enough to make the machine work .

used motor oil refining production line recycle waste engine oil to diesel

used motor oil refining production line recycle waste engine oil to diesel