- Product Details
- {{item.text}}
Quick Details
-
Dimension(L*W*H):
-
1200*610*1400 mm
-
Weight:
-
150 KG
-
Key Selling Points:
-
easy to operate and maintain
-
Product name:
-
Chipper Shredder
-
Application:
-
Cutting Forestry Wood Log Waste
-
Usage:
-
Wood Shredder Cutting Wood Branch
-
Raw material:
-
Waste Wood Branch
-
Engine:
-
15hp Diesel Engine
-
Feeding system:
-
Hydraulic Feeding System
-
Starting System:
-
Recoil/Electric start
-
Engine displacement:
-
400cc
-
Discharge height:
-
1400 mm
-
Crushing diameter:
-
≤100 mm
Quick Details
-
Use:
-
wood branches make chippings
-
Place of Origin:
-
China
-
Brand Name:
-
COB
-
Dimension(L*W*H):
-
1200*610*1400 mm
-
Weight:
-
150 KG
-
Key Selling Points:
-
easy to operate and maintain
-
Product name:
-
Chipper Shredder
-
Application:
-
Cutting Forestry Wood Log Waste
-
Usage:
-
Wood Shredder Cutting Wood Branch
-
Raw material:
-
Waste Wood Branch
-
Engine:
-
15hp Diesel Engine
-
Feeding system:
-
Hydraulic Feeding System
-
Starting System:
-
Recoil/Electric start
-
Engine displacement:
-
400cc
-
Discharge height:
-
1400 mm
-
Crushing diameter:
-
≤100 mm
Product Description
The waste wood shredder machine is a combination of a high-speed selective knife disc and a sharp blade to crush materials. An automatic feeding machine can easily crush branches within 5 cm in diameter or 8 cm in diameter into the machine with high crushing efficiency.
This branch crusher, also called the splitter, may crush the branch leaf, the bamboo, the straw, and so on, the crushing effect is good
Product Paramenters
|
Model
|
COB-50
|
COB-100
|
COB-120
|
||
|
Motor
|
Electric motor/diesel/gasoline
|
|
|
||
|
Inlet size
|
450*390 mm
|
570*530 mm
|
700*560
|
||
|
Crushing diameter
|
≤50 mm
|
≤100 mm
|
≤120 mm
|
||
|
Discharge height
|
700 mm
|
1400 mm
|
1400 mm
|
||
|
Rotating speed
|
3600 r/min
|
3600 r/min
|
3600 r/min
|
||
|
Power
|
7.5 HP
|
15 HP
|
15 HP
|
||
|
Size
|
860*750*600 mm
|
1200*610*1400 mm
|
1800*900*1400 mm
|
||
|
Weighr
|
80 kg
|
150 kg
|
210 mm
|
||
The key parts of the machine are made of full welding steel of mechanical equipment. Strong and durable, good reliability, compact structure, easy to remove, easy to move.
Product show
Application
Application: residential property, scenic area, street, park, farm, garden, orchard, nursery.Objects: branches, leaves, trees, shrubs, vines, bamboo, straw, etc.
Use of crushed materials: after crushing by the machine, the debris can also be buried in the ground to make it rot naturally, improve the soil organic matter, improve the soil, the debris-covered in the bare soil surface, prevent dust, inhibit the growth of weeds, moisture soil, straw and grass after crushing can be used as herbivorous animal feed; Crumbs can also be used as raw materials for pulp and artificial boards, as well as biofuels
Manual
1. Gasoline and engine oil separate use:
The power is a four-stroke gasoline engine, gasoline, engine oil separate use. Gasoline uses 90# above, oil is four-stroke engine oil, the mark is 4T, do not use two-stroke engine oil.
2. Filling oil:
Oil is the key to making good use of the machine, do not add oil, strictly start, and check the oil level before each use. Strictly according to the oil dipstick filling, you must use the oil control in the diagonal range between the line and the line, with the line flush. Extra oil will cause the exhaust pipe smoke exhaust, engine overheating, the air filter is easy to choke oil-wet, affect the machine horsepower, will make a serious filter can not enter the air, lead to the sound of the machine. The oil is too small, below the line, will cause the machine cylinder, will cause serious damage to cylinder rod fracture. Brand oil is recommended for engine oils.
3. Change the engine oil regularly:
The new machine should be operated at low speed for 20 minutes before running, and new oil must be replaced after 5 hours. The method is the first sound of the machine after a few minutes of downtime (in the condition of heat engine oil change thoroughly, machine to machine) will tilt the dipstick or tool, loose motivation is placed at the bottom of the oil screw out the oil dipstick. Change the engine oil every 50 hours.
4. Air filter:
The air cleaner shall be cleaned every 8 hours. The paper air filter should be replaced every 50 hours. Paper air filter can not be washed with liquid detergent, only gently pat. The sponge air filter can use gasoline dry wash after use, pay attention to clean and skew, only one side to the air filter, air filter to prevent oil.
5. Spark plug:
The spark plug should be cleaned up once in half a year and should be replaced every year.
6. Sharpening and balancing of blades:
After the blade is used for a period of time, if the knife edge is not fast, it should be sharpened. Pay attention to balance on both sides of the blade and tighten the fixed blade screw.
7. Use safety:
Before use, should first clean up the grass brick, iron and other foreign bodies. The radius is 15 meters and people are not allowed to walk around. Don't fill the room with gasoline, and the spilled gasoline should be wiped out. Don't smoke while you're working. Wear good protective clothing and wear good glasses.
Packing & Delivery
Hot Searches
