- Product Details
- {{item.text}}
Quick Details
-
Standard:
-
ASTM C150
-
Origin:
-
Vietnam
-
INITIAL SETTING TIME:
-
45 Minutes
-
FINAL SETTING TIME:
-
180min
-
Compressive Strength:
-
42.5 GRADE
-
Cement:
-
Colour
-
Packing:
-
50KG/BAG
Quick Details
-
Place of Origin:
-
Vietnam
-
Grade:
-
42.5 Premium
-
Loss -on-ignition(L.O.I.):
-
2.89%
-
Standard:
-
ASTM C150
-
Origin:
-
Vietnam
-
INITIAL SETTING TIME:
-
45 Minutes
-
FINAL SETTING TIME:
-
180min
-
Compressive Strength:
-
42.5 GRADE
-
Cement:
-
Colour
-
Packing:
-
50KG/BAG
Portland cement
Portland cement, binding material in the form of a finely ground powder, usually gray, that is manufactured by burning and grinding a mixture of limestone and clay or limestone and shale. The inventor Joseph Aspdin, of England, patented the basic process in 1824, naming it for the resemblance of the cement when set to portland stone, a limestone from the Isle of Portland. When mixed with water, the anhydrous calcium silicates and other constituents in the portland cement react chemically with the water, combining with it (hydration) and decomposing in it (hydrolysis) and hardening and developing strength.
Portland cement is the most common type of cement in general use around the world, used as a basic ingredient of concrete, mortar, stucco, and most non-specialty grout.
It is a fine powder produced by heating materials in a kiln to form what is called clinker, grinding the clinker, and adding small amounts of other materials. Several types of Portland cement are available with the most common being called ordinary Portland cement (OPC) which is grey in color, but a white Portland cement is also available.
II. CEMENT STANDARD
1.Vietnam standard (TCVN)
- Quality of Cement as per TCVN 6260 - 2009
2. European standards (EN)
- Certificate I -EN 197-1.2000- CEM II 42,5 R
- Certificate II - En 197-1.2000 CEM II 42,5N
- Certificate III - EN 197-1.2000 CEM I 42,5R
3. American standards (ASTM)
- ASTM C150 TYPE-1
- ASTM C1157 TYPE- GU
- ASTM C1157 TYPE- HE
| AMERICIAN SOCIETY FOR TESTING MATERIALS | |||||
| Items | CHARACTERISTICS | Units | SPECIFICATION LIMIT | TEST RESULT | TEST METHODS |
| ASTM C150-TYPE I | |||||
| 1 | SiO2 | % | 22 max | 20.26 | ASTMC114 |
| 2 | Al2O3 | % | - | 5.16 | |
| 3 | Fe2O3 | % | - | 3.18 | |
| 4 | CaO | % | 60 min | 63.28 | |
| 5 | MgO | % | 6 max | 1.05 | |
| 6 | SO3 | % | 3 max | 2.55 | |
| 7 | Loss on Ignition, (LOI) | % | 3 max | 2.71 | |
| 8 | Insoluble Residue | % | 0.75 max | 0.69 | |
| 9 | Chloride conten | % | A | - | |
| 10 | Total Alkali Na2Ot®= Na2O + 0.658 K2O | % | 0.75 max | 0.55 | |
| 11 | C3S | % | A |
BY
CALCULATED |
|
| 12 | C2S | % | A | ||
| 13 | C3A | % | A | ||
| 14 | C4AF | % | A | ||
| 15 | Specific surface or Blaine | cm2/g | 3200 min | 3537 | ASTM C204 |
| 16 | Retained content on sieve 45mm | % | A | ASTM C430 | |
| 17 | Setting time | ||||
| 18 | - Initial Setting Time | Minute | 45 min | 125 | ASTMC191 |
| 19 | - Final Setting Time | Minute | 375 max | 185 | |
| 20 | Heat of hydration: | ||||
| 21 | 7 Days | KJ/kg | A | ASTM C 186 | |
| 22 | 28 Days | KJ/kg | A | ASTM C 186 | |
| 23 | Mass density | g/cm | A | ASTM C 188 | |
| 24 | Sulfate resistance, 14 days expansion | % | A | ASTM C 452 | |
| 25 | Air content of mortar | % | ≤ 12.0 | ASTM C 185 | |
| 26 | Autoclave expansion | % | < 0.80 | ASTM C 151 | |
| 27 | Compressive strength | ||||
| 28 | - 3 days | MPa | 12 min | 16.8 | ASTMC109 |
| 29 | - 7 days | 19 min | 25.3 | ||
| 30 | - 28 days | 28 min | 37.2 | ||
| 31 | Fineness | ||||
| 32 | Retained content on sieve 0.09mm | % | 3 max | 0.12 | ASTM C430 |
| 33 | Chloride content | % | 0.1 max | 0.04 | ASTMC114 |
| 34 | CaO free | % | 1.5 max | 0.65 | ASTMC114 |
| A: No applicable, | |||||
| C3S = (4.071x%CaO)-(7.60x%SiO2)-(6.718x%Al2O3)-(1.43x%Fe2O3), | |||||
| C2S=(2.867) x % SiO2- (0.7544 x % C3S), | |||||
| C3A =(2.650x% Al2O3)-(1.692x% Fe2O3), C4AF = 3.043 x % Fe2O3 | |||||
Our services
Preparing for long term cooperation, credible and reliable supplier
Offering consultant for related products, variable products for different choice
Givering best price, high quality , fast delivery
Respond quickly, professional team, optimizing the packing , loading and shipping of products
FAQ
- What is payment ?
Usualy, we accept irrevocable L/C at sight for payment. If customer prefers T/T, that is 30% deposit TT in advance, 70% TT after the copy of B/L. 30days, 60days and 90days deferred L/C is also acceptable, the deferred L/C should be confirmed by first bank class
- What is guarantee term on the quality of the product?
We can offer the third party inspection certificate issued by world famous agencies such as SGS, after they checked at the loading port. factory plant also issues report according to European Standard like EN197-2000,USA Standard ASTMC-150....
Contact us
MS- HA
Pls contact me freely if you want to know more details about our products and company.
ADAVINA IMPORT EXPORT COMPANY LIMITED
Add: Nam Hoa village, An Hung commune, An Duong districts, Hai Phong
Mobile: +84 942.076.856
Phone/Viber/Whatsapp/
Skype:
:
+84 942.076.856
