ASD-01 is A two-component, neutral, room temperature curing. high modulus of silicone building sealant,when using the A and B components in accordance with the provisions, mixing ratio, curing reaction into A cold resistant, heat resistant, no corrosion of the elastomer. Resistant to ozone, ultraviolet resistance and other good climate resistance, fu on its long service life.
Have good adhesion, in normal conditions without undercoat, after curing to most building materials, such as glass, aluminum, steel surface can produce good stick relay.
This product is A component for white, black B component, A/B components by volume than 10:1 mix, mix to black.
Explore More Products
- Product Details
- {{item.text}}
Quick Details
-
Package:
-
Iron and plastic buckets
-
Port:
-
Tianjin
Quick Details
-
Place of Origin:
-
Hebei, China
-
Model Number:
-
ASD-01
-
Product name:
-
Two-component silicone structural sealant
-
Package:
-
Iron and plastic buckets
-
Port:
-
Tianjin
Why Choose Us
Products Description
|
item
|
value
|
|
Place of Origin
|
China
|
|
|
Hebei
|
|
Main Raw Material
|
107 Silicone Oil
|
|
Usage
|
Construction, Packing
|
|
Model Number
|
ASD-01
|
|
Product name
|
Two-component silicone structural sealant
|
Two-component silicone structural sealant ASD-01
Storage period:
A and B components should be stored separately in A cool and dry place, storage temperature should be lower than 27 ℃.On this condition, the product storage period is 6 months.
Tip: before construction, material intermiscibility test must be conducted.
T
wo-component silicone structural sealant ASD-01
Don't use ASD in the following occasions a 01 silicone sealant.
All leaking oil, plasticizer and other liquid organic materials,these materials may influence the effect of adhesive sealant. When sizing material surface temperature more than 50 ℃,this will make the sealant in curing process produces foaming phenomenon. At the age of damp and often into the water.
Ground pedestrian walkways,excessive friction and physical damage.
1.Very low moisture vapor transmission rate (MVTR) and air permeability. Water vapor transmission rate: below 10g/m3.
2. A properly constructed double seal unit containing PIB butyl sealant will retain argon insulating gas and dry internal unit airspace for decades.
3.In the manufacturing process of insulating glass, the product is used for caulking and sealing.
4.No peculiar smell (our factory strictly controls the raw materials, and some manufacturers may use recycled rubber, resulting in product odor).
5. No corrosion to metal, coated glass, concrete, marble, granite, etc.
6. Applicable temperature: -40 ℃ -80 ℃, keep the surface and edges and corners from cracking and sagging.
7. Extrusion temperature: 120-135 ℃
Recommend Products
Hot Searches
