Battery Hot Air Cordless Heat Gun Shrink Wrap Heat Gun for Makita battery

Hot Air soldering Gun temperature control model cordless hot air gun with different battery interface

Operating Instruction

The characteristics

1. High quality heating core, fast heating up, long service life

2. Imported super quiet motor, low noise, long service life.

The main use

1. Heating and drying of electronic components

2. Local heating and drying of equipment and accessories.

3. Large area or local heating and drying of wood, furniture, etc.

4. Paste physical preheating before operation.

5. Heat and separate and dismantle the attached objects.

6. Clothing and fabric debris removal

The security

1. Anti-overheating design, built-in temperature control switch in heating core to prevent high temperature.

2. The air outlet is reliably grounded and safe to use.

3. The barrel is made of engineering plastics, with good heat resistance and shockproof performance.

Use method

1. Plug in the 220VAC power supply and adjust the appropriate temperature and air volume according to the requirements of the heated object.

2. Swing the air outlet evenly at the object to be heated, so that the object is heated evenly.

3. After heating, turn off the power switch in time and place the air outlet with the heat gun facing upwards.

Matters needing attention

1. Before using the heat gun, check whether the power supply voltage is consistent.

2. Check whether the air inlet and outlet of the heat gun are blocked by dirt. If so, clear them in time.

3. When using the heat gun, the temperature of the air outlet is very high. Do not let the air outlet close to fusible and explosive items, and do not touch the air outlet with your hands and clothes.

4. After use, the temperature of the air duct is relatively high. Do not let any articles contact the air duct, and the air duct should be placed upward

COMPAMY INFORMATIONS