Autodragons car aftermarket universal microwave sensor radar blind spot lane assist system side mirror detection monitoring bsm

- 24GHz mircrowave sensing technology

- Detection range 3mx8m for vehicle/motorcycle in adjacent lane

- Visual warning via LED indicator or laser

- LED indicator can be individual or built in A pillar/side mirror

- Audible warning when turn signal is on

- Only warn when other vehicle is approaching to avoid false alarm

- With CAN interface, only work above certain speed, e.g., 20Kmh

- Work under adverse weather conditions

- Supplied side mirror with OEM quality

- Tailor-made sensor mounting brackets for different cars

- No change on vehicle appearance

- Door-opening Collision warning function optional

Bsm Features
Blind Spot Monitoring System (Blind Spot Information System) is designed with latest microwave technology to warn driver of other vehicle or motorcycle approaching in the next lane, which is possibly in blind spot from side mirror.

Blind Spot Monitoring System is activated automatically when vehicle speed is more than 10Km/h, LED indicator turns on if sensor detects another vehicle or motorcycle in the next lane coming closer. If you switch on turn signal at the same side when object is detected, LED indicator will flash, and you will also hear 3 beeps. If you switch on emergency button (both sides turn signals turn on), LED indicator will not flash. When vehicle speed is lower than 20Km/h, system will stop work.

Blind Spot Monitoring System Specifications
Working Voltage: 10V-16V
Max Working Current: 250mA
Work Temp: -30°C - 70°C
Detection Rang: 4m-6m

1. Sensors
Install sensors at two rear corners of car behind plastic bumper, keep arrow mark "→" on top cover pointed outside and horizontal (parallel to the ground), and form 50 degree angle to car body (front and back direction). The front cover of sensor should be vertical to the ground. See following steps,

I. Find a suitable location for sensor stand, keep two sensor-fixing screw holes in stand up and down, adjusting stand angle, make sure flat panel is vertical to the ground, and form 50 degree angle to car body (front and back direction).

II. Put AB glue on stand base around 3M sticker, then peal off 3M sticker cover, put stand base on selected location. Also put AB glue into stand rotation parts to stop rotation.

III. After stand is fixed tightly (about 8 min), screw sensor onto stand with arrow mark "→" on top cover pointed outside, and arrow mark "↑↑" on side of sensor upright.

Note: Make sure no metal object in front of sensor, and any metal parts around sensor such as cable, lamp housing, etc., should not be movable. Fix those movable parts around sensor to avoid moving during vibration.

2.Control Box
Put control box in a convenient location in driver's compartment.

3.LED Indicators
Stick LED indicators inside close to side mirrors, on a place where driver can see easily.

4.Buzzer
Hide buzzer inside where it is hearable.

5.Cables
(1)Red power cable to ACC+, Black cable to Ground, Yellow cable to left turn+,

White cable to right turn+.

(2)Connect cables to control box, matching colors and pin numbers


Testing

a. Stationary state, Opening ACC, or turn on vehicle.

b. After 3 seconds, walk towards vehicle around 6 to 8m from back and side, LED indicator will turn on, the installation is correct, otherwise, it is wrong.

c. After stationary testing, the side indictor will be lighted up if have vehicles around 6 to 8m, when you open turn signal light at this time, indicator will be lighted up and buzzer will be warning.

Is based in Shenzhen of China. We are specializing in developing, manufacturing and marketing auto lighting products and auto safety&security products.

We are the unique LED manufacture in China can supply most complete products for brand vehicles with very competitive prices that you won't find in the market.

We are able to develop new products continuously to a higher level to satisfy different needs of customers. Customeized OEM and ODM are welcome.

Find out more about what we can do for you. Trust us  is your business partner for you!

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.