Cigarette Cases smoking box with lighter

Cigarette Cases smoking box with lighter

1. Item No: HPNS-084

2. Material: stainless steel
3. OEM: acceptable
4. metal cigarette case
5, cigarette case with windproof lighter
6, Surface available for the cigarette case: smooth, shiny or plated...
7, MOQ: 1000pcs
8, Packing: 1pc/polybag+ box,300pcs/carton,
9, Logo available for the cigarette case: engraved logo, embossed logo, silk-print logo, laser logo...
10, It also can used as a business card case, ID case, etc...
It has good quality and workable price,
can provide various of designs option.
also can offer you many cigarette holders according to customers' requirements.

Aerating method

1. aeration, there must be no Mars or fire around, to ensure safety. Do not smoke while filling;

2. qualified butane gas should be used, inferior gas may damage the lighter or reduce service life;

3. the ordinary type of aeration, please stand on the lighter, the gas bottle air outlet and cover the lighter air inlet, pressure several times, each time to maintain about 2 seconds; if the gas can not be filled, may be the gas tank retained excess air, At this point you can vent, with a small screwdriver at the inlet for 1-2 times, and then aeration operation;

4. the sound machine in aeration, please use a word screwdriver and other tools to loosen the inlet screw cover, and then follow the above steps. After aeration, the screw cover can be rotated, not too tight; otherwise, the cover is not dense and the sound of the cover is not crisp, and the gas will escape. Hardcover sound machine to use special air nozzle with aeration;

5. the gasoline engine refueling, should open the head cover, pull out and reverse the movement, open the outer sponge to add a proper amount of gasoline, such as gasoline infiltration into the inner layer, cover the outer sponge, and then into the housing;

After adding fuel 6. all kinds of lighters, wait at least 1 minute to adjust the temperature of the newly filled gas to room temperature, and wait until the residual gas attached to the appearance of the lighter is completely volatilized before ignition. If the ignition operation is carried out immediately, the residual gas on the surface of the lighter may burn, causing unnecessary danger. If the flame height is too high or too low when used, it is a normal phenomenon, and the flame height can be adjusted moderately.