- Product Details
- {{item.text}}
Quick Details
-
Model Number:
-
CQ186-F/H
-
Brand Name:
-
CQATMT
-
Type:
-
Safety valve,
Quick Details
-
Port Size:
-
DN15-DN65
-
Warranty:
-
1 years
-
Place of Origin:
-
JINAN
-
Model Number:
-
CQ186-F/H
-
Brand Name:
-
CQATMT
-
Type:
-
Safety valve,
Specification
|
item
|
UPVC plastic safety valve backpressure valve relief valve
|
|
Warranty
|
1 years
|
|
Type
|
Safety valve,
|
|
Customized support
|
OEM, ODM, OBM
|
|
Place of Origin
|
JINAN
|
|
Brand Name
|
CQATMT
|
|
Model Number
|
CQ186-F/H
|
|
Application
|
General
|
|
Temperature of Media
|
Medium Temperature, Normal Temperature
|
|
Power
|
Hydraulic
|
|
Media
|
Water
|
|
Port Size
|
DN15-DN65
|
|
Structure
|
Safety
|
Product Description
Introduction to product functions.
It is installed on the positive pressure discharge pipeline of the metering pump to prevent the occurrence of siphonage and eliminate the change in dosing amount caused by the pressure fluctuation at the dosing point. Remove the protective cap on the adjusting screw on site, rotate the adjusting screw, and adjust to the required pressure with the help of the pressure gauge in the pipeline. The back pressure can be set within the range of 0-06Mpa through the adjusting screw. Used in conjunction with a pulse damper to reduce damage caused by water hammer to the system, maintain a constant pressure from the pump outlet to the back pressure valve, and maintain a constant flow rate in the system.
Diameter: DN15, DN20, DN25, DN32, DN40, DN50, DN65 Set back pressure range: 003-0.6Mpa
Safety valve
The diaphragm and valve core are pressed tightly against the valve seat by internal springs. When the pressure in the system pipeline exceeds the preset pressure, the diaphragm and valve core are jacked up, and the medium is discharged to the return pipe and container. On site, the pressure can be set within the range of 0-10Mpa by adjusting screws with the help of the pressure gauge in the pipeline. The relief pressure is generally set higher than the system pressure by 01-02Mpa. The pressure regulation of the safety valve is not allowed to exceed the maximum pressure of the metering pump, Generally, the installation should be as close as possible to the outlet of the pump, and there should be no valves between the pump and the safety valve. Protect the safety of the pump and the normal operation of the system.
Diameter: DN15, DN20, DN25, DN32, DN40; DN50DN65 setting range: 003-1.0Mpa
Packing & Delivery
Conventional valves are packed in wooden cases.
Hot Searches
