Explore More Products
- Product Details
- {{item.text}}
Quick Details
-
Brand Name:
-
Topsail
Quick Details
-
Port Size:
-
DN20, DN25, DN32, DN40
-
Place of Origin:
-
Shaanxi, China
-
Model Number:
-
TSM-04V
-
Brand Name:
-
Topsail
1.2 Features
Support Bluetooth configuration and remote setting of device parameters;
Support dynamic control of valve opening and closing degree through pipeline temperature;
Support 11-level valve opening and closing degree, precise control;
Support NB-IoT / LoRa / BLE and other wireless communication methods;
Support remote control valve opening and closing degree;
Ultra-low power consumption, automatic calibration time when connected to the network and low battery alarm;
Built-in watchdog, do not crash;
It has the functions of anti-vibration, anti-moisture, anti-rain and harmful gas.
1.3 Technical Parameters
|
Working mode |
Proactively report at regular intervals. The reporting period can be set arbitrarily. |
|
C lock |
Built-in industrial clock, automatic time adjustment |
|
Parameter settings |
Bluetooth and remote (batch) settings |
|
Data interval |
The start time, end time, and payment period of the heating season can be set, and the sampling interval and reporting interval can be set. |
|
Threshold settings |
Upper temperature limit, lower limit, dynamic change threshold can be set . |
|
Interface |
DN20, DN25 , DN32,DN40 |
|
Shell material |
ABS+PC |
|
Body Material |
Brass |
|
Seat Seal Material |
Teflon PTFE |
|
Power supply mode |
Lithium battery power (12Ah), according to standard configuration parameters, it can be used for 6 years |
|
Temperature measurement range |
-20℃~ 125℃ |
|
Accuracy |
±0.5℃ |
|
Valve opening and closing degree |
can be adjusted in 11 states |
|
Wireless communication |
4G or NB module (full Netcom) |
|
Working current |
Low power consumption <40uA, report average current 60mA |
|
Working Environment |
Temp : -20℃ ~ 70℃ , Humidity :< 93%RH |
2.1 Product Size
Length * width * height = 131*89*158 (mm)
2.2 Product weight
Product weight about 0.85Kg
3.1 Remote configuration of device parameters
The device can remotely configure parameters through server software, including the water test time before heating (default 15 days), heating start time (default November 1), heating end time (default 1 st April )
3.2 Remote control
The server software can remotely control the opening and closing degree of the ball valve, and whether to allow the setting of indoor temperature data logger control.
3.3 Device wakeup
After the server sends the command, can press the button on the shell to wake up the device. After the device wakes up, it immediately starts networking and checks whether a command is issued and received.
3.4 Indicator status
P ressing the button to wake up the device, the indicator lights make different indication states according to the opening and closing of the ball valve.
3.5 Intelligent temperature control
In the case that the server-side software setting allows logger to control the wireless control valve, the opening and closing degree of the wireless intelligent control valve can be automatically controlled by logger.
3.6 Multiple working modes
Without affecting the heating experience, the device achieves the purpose of extending the battery life by automatically switching the working mode.
|
Heating stage |
Operating mode |
|
Test water before heating starts (default 15 days before heating starts) |
Check for orders issued 0.5 hours a day |
|
Heating start ( Default 1 st November ) |
Collect 3 times a day, send once every 8 hours (default) |
|
During heating period |
Supports opening and closing of the valve through pipe temperature for 7 days |
|
After heating season (default 2 nd April ) |
All valves closed |
|
Non-heating season ( 2 nd April- 15th October) |
Check orders once every 15 days |
Common faults and solutions
|
ID |
Faults |
Cause |
Troubleshooting method |
|
01 |
No data upload |
Battery disconnected from circuit board |
Check the lithium battery power supply lead and interface |
|
Battery voltage is too low |
Replacement battery |
||
|
02 |
The state of the ball valve uploaded by the control valve is not consistent with the command sent |
Open circuit between ball valve and circuit board |
Check the wiring or connection of the ball valve to the circuit board |
|
Motor damaged |
Replacement of wireless intelligent control valve |
||
|
03 |
Temperature logger can not control ball valve |
Temperature logger and control valves cannot be connected. |
1. Check if the environment is suitable for wireless communication 2. Multiple walls between temperature logger and ball valve . |
|
Temperature logger and control valve not match |
Restart the device to see if the ID match |
