- Product Details
- {{item.text}}
Quick Details
-
Brand Name:
-
Hantec
-
Model Number:
-
HTL-618
-
Type:
-
Spary adhesive
-
Color:
-
Yellow
-
Solid Content:
-
35%
-
Density:
-
0.80 kg/L
-
Viscosity:
-
40-70-cps
-
Tack Time:
-
2h
-
Shear Strength:
-
2.46 Mpa
-
Initial Strength:
-
0.7 Mpa
Quick Details
-
CAS No.:
-
QB/T2568-2002
-
EINECS No.:
-
QB/T2568-2002
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Hantec
-
Model Number:
-
HTL-618
-
Type:
-
Spary adhesive
-
Color:
-
Yellow
-
Solid Content:
-
35%
-
Density:
-
0.80 kg/L
-
Viscosity:
-
40-70-cps
-
Tack Time:
-
2h
-
Shear Strength:
-
2.46 Mpa
-
Initial Strength:
-
0.7 Mpa
SBS Spray Adhesive
Main components: Styrene-butadiene-styrene (SBS), petroleum resin, natural resin, eco-friendly solvent.
Characteristic:
1-Super adhesion strength
2-High solid content
3-Cost-effective, small amount for large area
4-Fast-dray, surface dry in 1-5 mins
5-Good smell, easy apply without impurity
6-Heat-resistant, aging resistance
2-High solid content
3-Cost-effective, small amount for large area
4-Fast-dray, surface dry in 1-5 mins
5-Good smell, easy apply without impurity
6-Heat-resistant, aging resistance
Technical Date Information:
|
Apperance
|
Light Yelllow Liquid
|
Density
|
0.80-1.1
|
|
Viscosity
|
70-200cps
|
PH Value
|
5.5-6
|
Application
Ordinary sponge, board, cloth, thin leather, paper, thermal insulant materials etc, used for sofa, swivel chair and thermal insulant fields.
Cautions during the operation:
1.Separate the spray workshop from other workshops, operator should wear safety.
2.Muzzle from 45°angle, better to keep a distance of 0.5m between the muzzle and the surface to be bonded.Move steadily and averagely, without pile up or lack of adhesive.
3.Spray evenly to cover the material and the coating should not be too thin or too thick.
4.Please agglutinate it when the coating is not sticky. The tack time will be affected by different temperature,humidity,ventilation, materials and other aspects.
5.Clean out the lance when not in use.
2.Muzzle from 45°angle, better to keep a distance of 0.5m between the muzzle and the surface to be bonded.Move steadily and averagely, without pile up or lack of adhesive.
3.Spray evenly to cover the material and the coating should not be too thin or too thick.
4.Please agglutinate it when the coating is not sticky. The tack time will be affected by different temperature,humidity,ventilation, materials and other aspects.
5.Clean out the lance when not in use.
Hot Searches
