S648 Fast Curing Retaining Adhesive anaerobic adhesive

Description:

SEAYU® S648 is a one part , high strength , which midium viscosity , Anaerobic Retainting Compounds . It in two work closely with metal with the air between off due to entrenched, vibration and impact of the leak .

Applicaton:

Used mainly in the hole with it. Especially applicable to the conditions for high strength .

Typical Properity Typical Value                                  Typical Range

Chemical Type                              Methyl Methacrylate fat
Color                                                           Green
Viscosity (mPa.s@25 °C )                            550                                                500- 650
Specific Gravity ( @25 °C )                         1.12                                               1.05 -1.15
Gap Fill ( mm )                                             0. 15
Shear Strength ( Mpa )                                   28                                                      ≥ 26
destroy moment ( N*m )                                 32                                                      ≥ 30
Average remove torque ( N*m )                     30                                                       ≥ 25
Temperature ( °C )                                                                                                  -54-1 75
Fixture Time ( min @25 °C )                          1 0                                                      5 - 15
Cured Time ( h @25 °C )                               24

The graph up shows the contaction between cured speed and material , Steel and in accordance with ISO 10123 of the tests in different ways of the shear motoki strength and fixation of time relations

Direction for Use

To achieve the best effect, should make the solid surface oil -free, dust-free ,and ensure the gap to fill with glue.
1.For sliding tie,only need bobbin and provided with a corner, assembling the left-right rotating to ensure good coating.
2. For press fit,two coated surface need with glue-coating. And in the proper pressure machine assembly.
3.For heat-shrinkable tie, glue coating on the shaft, then heat, the shaft sleeves can be assembled into a collar.Without enough strength to assemble before, don't touch.

NOTICE

This product is not used for pure oxygen or oxygen-enriched system.Cannot be used for storage of chlorine has strong oxidizing substances.Don't take back the glue, prevent pollution original packaging.This product is used for plastic products.
Workplace should ventilated, or forced ventilation.
Please keep away from children.
This product contains acrylic and methacrylic acid esters. It basically is mixed to the skin, eye has stimulative effect.
If gets to skin, please immediately with soap and water cleaning.
If you touch the eyes carelessly, please use a lot of clean water and call a physical attention.
Please refer to the details of this product MSDS .

PACKAGE

Order code : 1340023    50ml/ bottle
Order code : 1340030    250ml/ bottle

STORAGE

Store the product in a clean and dry location in unopened containers at 8-28 °C .
Shelf-life:18month

About Us

Our transportation

Our contact details