Hot Sale ST05K PIR Motion Sensor and Infrared Presence Sensor Switch

Hot Sale ST05K  Time Delay 220V PIR Motion Sensor Infrared Presence Motion Sensor Switch

The product adopts good sensitivity detector and integrated circuit. It gathers automatism, convenience, safety, saving-energy and practicality functions. The wide detection field consists of up and down, left and right service field. It works by receiving human motion infrared rays. When one enters the detection field, it can start the load at once and identify automatically day and night. Its installation is very convenient and its using is very wide.

SPECIFICATION:

Power Source: 22 0 -240V/AC Detection Range: 360°

Power Frequency: 50/60Hz                                    Detection Distance: 3-20m (<24 ℃ ) adjustable

Ambient Light: <3-2000LUX (adjustable)                Working Temperature: -20~+40℃

Time Delay: Min.10sec±3sec                                  Working Humidity: <93%RH

Max.30min±2min                                 Power Consumption: approx 0.5W

Installation Height: 2.2-6m

Rated Load:  110 -130V/AC :                        220 -240V/AC :

2000W(incandescent lamp)         1000W(incandescent lamp)

1000W(energy-saving lamp)         500W(energy-saving lamp)

Lifetime and Warranty:

FUNCTION:

Ø Can identify day and night: The consumer can adjust wor king state in different ambient light. It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on the “ moon ” position (min). As for the adjustment pattern, please refer to the testing pattern .

Ø SENS adjustable: It can be adjusted according to using location. The detection distance of low sensitivity could be only 3m and high sensitivity could be 20 m which fits for large room.

Ø Time-Delay is added continually: When it receives the second induction signals within the first induction, it will restart to time from the moment .

CONNECTION:

Ø  Please move the upper cover with anti-clockwise whirl as per the diagram on the right.

Ø Connect the power and the load according to the connection-wire diagram.

Ø Fix the bottom on the selected position with the inflated screw .

Ø Install back the upper cover on the sensor, then you could switch on the power and test it.

CONNECTION-WIRE DIAGRAM: (See the below figure)

Our company adopts automatic machines, such as: SMD, auto component inserter, wave solder, autoinjection machines,the daily output is up to 20000-30000 pcs.

The concept of our company is"advocating new modern living environment",which focuses on researching and developing the contemporary household intelligent product.Our product can be truly satisfied for different customer's requirement,most of them are available with CE GS ROHS R&TTE REACH certification .