8-Channel Battery and Supercapacitor Analyzer (5 mA - 12A, up to 5V) for Coin Cells and Cylindrical Batteries BST8-12

Electricity requirement

110V AC or 220V AC selectable for universal use

Power Consumption

826 W

Battery Testing Control Unit

Each battery and supercapacitor analyzer requires to connect one battery testing control unit .

One battery testing control unit could connect up to 10 battery-and-supercapacitor analyzers

Resolution

AD : 16bit ; DA : 16bit

Input Impedance

≥1MΩ

Current

Three ranges of Max. current are built-in, and switchable on the device

1)The first range: 5.0 mA – 1 A; Minimum Current interval: 2 mA

2)The second range: 1 A - 6 A; Minimum Current interval: 12 mA

3)The third range: 6 A - 12 A; Minimum Current interval: 24 mA

4)Frequency: 10 Hz

5)Accuracy: ± 0.05% of F.S.

Voltage

Range: 25 mV - 5 V programmable; Minimum Voltage interval: 10 mV

Frequency: 10 Hz

Accuracy: ± 0.05% of F.S.

Single Channel Output Power

60 W Maximum

Data register conditions

Response Time: < 1ms

Time Range: 365 * 24 hours

Charging Modes

Constant Current Charging

Constant Voltage Charging

Constant Current & Voltage Charging

Constant Power Charging

Discharging Modes

Constant Current Discharging

Constant Voltage Discharging

Constant Current & Voltage Discharging

Constant Power Discharging

Constant Resistance Discharging

Measurement cycles

1 - 65,535 cycles

Product Dimensions

480mm(L) x 560mm(D) x 135mm(H)

Channels

Eight independent programmable channels

Each channel can set different working modes and functions independently

Programs & Software

1)The software (TC8.0) is included to set various working modes for measuring capacity and lifecycle for all types of rechargeable batteries

2)Working modes Include constant current discharge, constant current charge, constant voltage charge, constant resistance discharge, rest, cycles, etc.

3)Limited threshold conditions include voltage, current, time, capacity, negative voltage slope, etc.

4)With real-time monitoring windows and integrated graph/data windows, the testing process can be observed more directly and efficiently

5)During the test, the software will provide instructions and warnings for assistance

6)The calibration software can be used to calibrate the analyzer

7)MS Excel 2013 30 days free trial is pre-installed for you to output the Excel data file.

Test Reports and Curves for analysis

1)Different types of curves can be created by software base on user definition. (Voltage-time curve, current-time curve, capacity-voltage curve, loops times charge/discharge capacity curve, loops times charge/ discharge efficiency curve, etc)

2)Data reports are created by the software. User can easily compare the performance of the batteries tested in channels both visually and statistically

Protection and Auto-recover

If the power failure occurs during testing, the system will shut down all operating channels. Once power is recovered, the system will automatically resume those stopped channels and ensure that the test is normally conducted, so that no cases will lose any data.

Battery Holders

Two types of battery holders are included in the BST8-12 Standard package:

8 Gold Plated spring load holders with adjustable height for measuring cylinder or coin cell up to 70mm(H) (pls click a picture below  1-2 to enlarge)

8 alligator clips with cable for universal connecting (especially for pouch cell, pls click the picture 3-4 below  )

Laptop Computer

Brand new laptop with MS Window 10, MS Excel 2013 30 days free trial is included and the latest version testing software is installed and calibrated for immediate use.

Notice: It is suggested to use an external hard drive to keep an instant backup of the collected data.

Compliance

CE Certified

MET, TUV, CSA, UL certification are available upon request at extra cost

Warranty

Two Year limited warranty with lifetime support for the battery analyzer.

Application Notes

New buyers must buy the software installed laptop to avoid trouble from installation. If you like to run multiple battery analyzers on one Laptop, you can just buy multiple analyzers with one laptop which are offered at a discounted price.

Warning: Please choose NEVER for Screen and Sleep off in Power& Sleep setting of your computer, or it may lose connection from the battery analyzer.

The customer can easily combine up to 10 battery analyzers (0.002-1mA, 0.1-10mA, 6mA-3000mA) to one computer by using a transit device.

You may order MTI's movable rack to organize the battery analyzers (click the first picture below for more information)

You may order an internal resistance tester to measure DC resistivity (click the second and third picture below for more information)

Net Weight

11.5 kg (26 lbs)

Shipping Weight

18 kg (40 lbs) / Analyzer only: 25lbs

Shipping Dimensions

610mm(H) x 510mm(W) x 356mm(H) (24" x 20" x 14")

Item

Description

Qty

1

Battery analyzer + Brand new laptop with MS Window 10 system and battery analyzer operation software installed

1 pc

2

RS232-to-USB Adapter for connecting the analyzer to the USB port on the computer ;Test-Control software 5.3 Installation Disk

1 pc

3

Alligator Clips for connecting a battery

8 pc