- Product Details
- {{item.text}}
Quick Details
Quick Details
Specifications
1.Head gasket shellac
2.59ml
3.Fast drying,hard setting
4.Resist most petroleum products and shop fluid
5.High quality
Descriptions and Features :
Synid Gasket Shellac Compound is a hard setting, slow drying liquid designed to coat, seal and repair most gaskets including felt,paper,rubber and composition type gaskets. It seals metal gaskets and threaded connections for light duty service. synid Gasket
shellac have three color: dark bown ,gold yellow, grey, red brown color.
1. Flexible when dry
2. Good fuel resistance
3. Improves reliability
4. Saves time and labor
5. Increase sealing reliability
6. Applies easily
7. Cleans up fast
8. Temperature Range - 65 °F to + 350°F
Typical Applications:
Automobile cylinder bed
Conventional seal
Technical Data Sheet :
|
Odor |
Alcohol |
|
Boiling Point |
180 ° F |
|
PH |
none |
|
Solubility in Water |
Partial |
|
Specific Gravity |
1.1 |
|
VOC(Wt.%) |
32% |
|
Vapor Pressure |
33 mm Hg @ 68 ° F |
|
Vapor Density (Air=1) |
2.07 |
|
Evaporation Rate |
7.7 (ether = 1) |
HOW TO USE
Application Temperature, °C(°F): +5~+45 (+41~+113)
- 1. Apply with brush or roller on dry, clean surfaces, free from dirt, oil, rust and dried paints or sealants.
When brushed on gaskets, they should be dry.
- 1. The recommended thickness of the film depends on the type of surface. Generally, the wet film should be applied thin (approximately 0.010”) and uniform.
- 2. For bonding gaskets, apply on both surfaces. Allow to dry until surfaces are dry to the touch.
Chemical / Solvent Resistance
The product retains effective properties in contact with automotive fluids, such as motor oil, transmission fluids, alcohol and antifreeze solutions.
