- Product Details
- {{item.text}}
Quick Details
-
Place of Origin:
-
Shenzhen
-
Brand Name:
-
XZX, XZX
-
Model Number:
-
2023818
-
Type:
-
silicone sealant, Two component Adhesives, Two Components Liquid
-
Mixing Ratio:
-
A:B=3:1(By weight)
-
Application:
-
Wooden table
-
Color:
-
Customized
Quick Details
-
CAS No.:
-
7085-85-0
-
Other Names:
-
Silicone Sealant
-
EINECS No.:
-
230-391-5
-
Place of Origin:
-
Shenzhen
-
Brand Name:
-
XZX, XZX
-
Model Number:
-
2023818
-
Type:
-
silicone sealant, Two component Adhesives, Two Components Liquid
-
Mixing Ratio:
-
A:B=3:1(By weight)
-
Application:
-
Wooden table
-
Color:
-
Customized
Product Description
DETAILS SHOW
01.SAFE & STABILIZE
it has high hardness ,and it could grinding and polishing after it cured .
02.HIGH TRANSPARENT
Using high quality raw materials , super clear high penetration, yellow resistance
03.BOTTLE DESIGN
The Radian bottle, it is more convenient to pour out, is not easy to leak
04.NO BUBBLES
After mixed the resin A and hardener B well ,then let it stand for 2 minutes, the bubbles will self-acting disappear.
01.SAFE & STABILIZE
it has high hardness ,and it could grinding and polishing after it cured .
02.HIGH TRANSPARENT
Using high quality raw materials , super clear high penetration, yellow resistance
03.BOTTLE DESIGN
The Radian bottle, it is more convenient to pour out, is not easy to leak
04.NO BUBBLES
After mixed the resin A and hardener B well ,then let it stand for 2 minutes, the bubbles will self-acting disappear.
Operating Steps
1. Prepare materials : measuring cup, AB glue, glue stick, toner, electronic scale and mould
2. Open the electronic scale, put up the measuring cup, reset tozero. Pour into AB glue, weight ratio A: B = 3:1. (example: A 30 g, B 10 g)
3. Use glue stick along a direction to stir gently , until no wiredrawing, transparent as water ,then stand for a few minutes for the bubbles self-actingdisappear.
4. Pour in the model after the bubble disappeared, it could add pigments or toner as you want
5. After cured, it can take off the mould.(usually in summer need about 24 hours , in winter need about 36 hours)
1. Prepare materials : measuring cup, AB glue, glue stick, toner, electronic scale and mould
2. Open the electronic scale, put up the measuring cup, reset tozero. Pour into AB glue, weight ratio A: B = 3:1. (example: A 30 g, B 10 g)
3. Use glue stick along a direction to stir gently , until no wiredrawing, transparent as water ,then stand for a few minutes for the bubbles self-actingdisappear.
4. Pour in the model after the bubble disappeared, it could add pigments or toner as you want
5. After cured, it can take off the mould.(usually in summer need about 24 hours , in winter need about 36 hours)
FAQ
Why the finished product is soft?
1. Maybe the glue ratio wasnot accurate, or reversed the AB glue ratio
2. Notstirred well, and still has wire drawing;
3. When take off the film ,it was not cured dry completely .
Why are there a lot of bubbles of finished product?
1. Maybe it was too quickly when mixing the AB glue, or Directly pour in the the mould before bubbles disappear
2. After the glue into the mould, should observe the mould wall, if have bubbles it should rub bubble in a time.
Could put the finished product under the sun?
No, all products cannot exposure to excessive ultraviolet ray long time that maybe can make product turn yellow.
Why the finished product is soft?
1. Maybe the glue ratio wasnot accurate, or reversed the AB glue ratio
2. Notstirred well, and still has wire drawing;
3. When take off the film ,it was not cured dry completely .
Why are there a lot of bubbles of finished product?
1. Maybe it was too quickly when mixing the AB glue, or Directly pour in the the mould before bubbles disappear
2. After the glue into the mould, should observe the mould wall, if have bubbles it should rub bubble in a time.
Could put the finished product under the sun?
No, all products cannot exposure to excessive ultraviolet ray long time that maybe can make product turn yellow.
How to do it when the AB Glue get on hands?
Clean with water or unloaded a water wash
Clean with water or unloaded a water wash
Curing Time
Time Surface Dry Completely Dry
Summer 6-8hours 20-24hours
Winter 8-12hours 24-36hours
PS:
1. The poured product thickness more thicker ,it will dry faster , if it more thinner , it will dry slower.
2. If you think the cured time too slowly , you can try to change the mix ratio 3:1.1 (1.25) weight ratio.
3. The Mix ratio : weight ratio is 3:1 , volume ratio is 2.5:1 .
Time Surface Dry Completely Dry
Summer 6-8hours 20-24hours
Winter 8-12hours 24-36hours
PS:
1. The poured product thickness more thicker ,it will dry faster , if it more thinner , it will dry slower.
2. If you think the cured time too slowly , you can try to change the mix ratio 3:1.1 (1.25) weight ratio.
3. The Mix ratio : weight ratio is 3:1 , volume ratio is 2.5:1 .
Packing&Shipping
|
Epoxy Resin(A)
|
Hardener (B）
|
It could custom package
|
|
|
|
5KG/Barrel
|
5KG/Barrel
|
20KG/BOX
|
|
|
Company Introduction
Shenzhen XinZhanXiang Technology CO., LTD
.
We are a professional adhesive research and development, production, sales as one of the environmental protection production enterprises.Our products could pass SGS standard certification, the European Union ROHS standard. Our company has a strong technical force and professional r & d institutions, sophisticated production equipment, professional, pragmatic, efficient after-sales service team.Follow the pace of social development, keep pace with The Times, walk in the forefront of the industry.The company mainly produces the main products of the exhibition of "XZX" brand series: XZX brand instant glue series, XZX brand hot melt adhesive series, XZX brand white latex adhesive series, XZX brand treatment agent series, XZX brand organic silicon series, XZX brand resin series, XZX brand shadowless glue series, XZX brand high temperature resistant adhesive series. Our company uphold the "quality of survival, integrity as the cornerstone, environmental innovation and development, customer satisfaction as the purpose", Our business philosophy want to provide customers with the best quality products and super first-class service.We sincerely look forward to working with you hand in hand and common development.
Hot Searches
