YPG Model Detergent Powder Pressure Spray Dryer Spray Drier Equipment

KODI YPG Model Detergent Powder Pressure Spray Dryer Spray Drier Equipment

1, YPG  Detergent Powder pressure spray dryer / Detergent Powder pressure dryer / Detergent Powder pressure drier

2, Liquid or slurry drying processor

3, Easy operation and control

4, Stainless steel

KODI YPG Detergent Powder pressure spray dryer is suitable for solution, suspension, slurry, paste material, etc. Liquid material is atomized to small fog drops. And fog drops contact with hot air directly in the drying tower. Moisture content is evaporated instantly. So spray dryer features high efficiency, high mass transfer area, and short drying time, in general it is 5~30 seconds. Operating temperature can be adjusted according to actual situation, in general inlet air temperature is 150~500°C. And its automation control degree is control, environment solution environment can be solved.

YPG Detergent Powder Pressure Spray Dryer Application

Foodstuff industry: Amino acid and similar substance, flavoring, protein, starch, dairy products, instant coffee, fish powder, meat powder, tomato paste and so on.

Chemical industry: Organic catalyst, resin, synthetic washing powder, thiamin, dyestuff, dyestuff, white carbon black, graphite, ammonium phosphate and so on.

Ceramic industry: Magnesium oxide, kaolin, metallic oxide, dolomite and so on.

YPG Detergent Powder Pressure Dryer Features

1. The machine has high efficiency to collect dust

2. Without the phenomenon of adhering wall

3. Energy saving and high efficiency

4. Particularly it is suitable for thermal sensitive material

5. Short drying time

Details of YPG Detergent Powder Pressure Drier

Working Principle of KODI Detergent Powder Pressure Spray Dryer

The solution, emulsion, suspension liquid or slurry are sprayed into fine beads in the hot air, going down from the top of the drying chamber to the bottom, the water will be evaporated to and the product becomes small granular product. Induce hot air from the top of drying tower, at the same time, pump the material liquid to the top of the tower by high pressure pump, the feeding solution becomes fine beads or small droplets through the pressure nozzle(s). When the droplets meet the high temperature hot air, the water will be evaporated immediately, and the material liquid is dried into dry product in a very short time, the product is discharged from the bottom of the drying tower, or from the cyclone (depend on the configuration). When the hot air contacts with the droplets, the temperature declines significantly, and the humidity increases greatly, and then will be exhausted by exhaust fan. The fine powder in the air will be collected through different separating devices There’re different fine powder separation and recovery devices, such as cyclone (the common type and various combination type), bag filter, cyclone + bag filter, cyclone + wet scrubber, and bag filter + wet scrubber etc. We should different fine powder separation and recovery devices as per the characteristics of product and requirements of customer. Depend on the product features and requirements, we might install secondary drying and cooling system (such as ZLG vibration fluid bed or pneumatic transportation), formulation system or powder sieving system etc after the spray dryer, or dehumidifier. The particle size of the product from pressure spray dryer is normally within the range of 120mesh to 20 mesh. If bigger particles are required, we suggest FL Fluidized Granulator or re-combined agglomerator.

YPG Detergent Powder Pressure Dryer Technical Parameters

Flow Chart of YPG Detergent Powder Pressure Drier

Successful Experience Overseas of KODI Detergent Powder PressureSpray Dryer

YPG Detergent Powder pressure spray dryer has a very mature technology and process, and KODI company has rich overseas site installation experience and good after sale service .