5.2.1 Switch output
It has two switching outputs. Each switch output can be set with a pressure switch point and an opening delay value. The corresponding output will switch when the pull-in value of the switch point is reached and return when the pressure drops below the release value.
5.2.2 Analog output
According to the model specifications: can take one analog output. Can output 4～20mA, 0～10mA and other analog signals
5.3 System settings:
5.3.1 Setting block diagram
5.3.2 Menu description:
AL1H This value is the pull-in value of relay 1
AL1F this value is the relay 1 release value
AL1D this value is relay 1 action delay
AL2H This value is the pull-in value of relay 2
AL2F this value is the relay 3 release value
AL2D this value is relay 3 action delay
5.3.3. Operation instructions:
The menu switch uses the plus and minus keys to switch, and the data view is through the mode key. When the menu is displayed, press mode to view the data. The modification is realized by the plus and minus keys. To confirm, press the MODE key again.
The menu has a circular structure and can be turned up and down. You can scroll up and down without exiting the menu.
In the setting state, if there is no operation for 30 seconds, and the menu is not exited, the setting state is automatically
exited, but the modified data is not saved, and the data is still the original data.
* Press the "mode" key
* Display “LOCK” (prompt for password)
* Press the ▲ or ▼ key to enter the password "0001",
* Press "mode" key to confirm
* Press the ▲ or ▼ key to scroll up or down to select the menu (AL1H, AL1F, AL1D, AL2H, AL2F, AL2D, END)
* Press the "mode" key to enter the selected menu.
* Press the ▲ or ▼ key to change the setting
* Press “mode” key to confirm, if necessary, use ▲ or ▼ key to select other menus to modify.
* After the modification is completed, select the "END" menu, press the "mode" key to confirm the save and exit
* If no key is pressed for 30 seconds, it will automatically exit the setting state, but the modified data will not be saved.
- Product Details
- {{item.text}}
Quick Details
-
Model Number:
-
HDP9000
-
Pressure range:
-
-0.01...100MPa
-
Accuracy:
-
≤±0.5%FS
-
Display accuracy:
-
±0.1%FS
-
Display method:
-
4 digits 0.36" digital tube 2 LED lights
-
Power range:
-
12-30VDC
-
Maximum power consumption:
-
< 3W
-
Electrical connection:
-
M12 industrial connector
-
Output:
-
Two-way switch+ one-way analog(optional)
-
Response time:
-
<5ms
-
Display range:
-
-1999~9999
Quick Details
-
Whether the smart:
-
Yes
-
Place of Origin:
-
Anhui, China
-
Brand Name:
-
Huadianauto
-
Model Number:
-
HDP9000
-
Pressure range:
-
-0.01...100MPa
-
Accuracy:
-
≤±0.5%FS
-
Display accuracy:
-
±0.1%FS
-
Display method:
-
4 digits 0.36" digital tube 2 LED lights
-
Power range:
-
12-30VDC
-
Maximum power consumption:
-
< 3W
-
Electrical connection:
-
M12 industrial connector
-
Output:
-
Two-way switch+ one-way analog(optional)
-
Response time:
-
<5ms
-
Display range:
-
-1999~9999
Technical Parameters
The intelligent pressure switch is an intelligent digital display pressure measurement and control product integrating pressure measurement, display, output and control. The product is a fully electronic structure. The front end uses an oil-filled piezoresistive pressure sensor with an isolation membrane. The output signal is amplified and processed by a high-precision, low-temperature drift amplifier.
The processed digital signal and the processed signal control the two-way switch to measure and control the pressure of the control system. The intelligent digital pressure switch is flexible to use, simple to operate, easy to debug, safe and reliable. Widely used in hydropower, tap water, petroleum, chemical, machinery, hydraulic and other industries to measure, display and control the pressure of fluid medium
2.Features
◆4 digits display the current pressure value. (Normal application)
◆Press the preset switch point and delay switch output
◆The switching value can be set arbitrarily from zero to full scale
◆The casing is equipped with node action light-emitting diodes for easy observation
◆Key adjustment and setting various parameters on site, easy to operate.
◆ 2 way switch output, load capacity 1.2A
◆Analog output (4～20mA) (optional)
2.Features
◆4 digits display the current pressure value. (Normal application)
◆Press the preset switch point and delay switch output
◆The switching value can be set arbitrarily from zero to full scale
◆The casing is equipped with node action light-emitting diodes for easy observation
◆Key adjustment and setting various parameters on site, easy to operate.
◆ 2 way switch output, load capacity 1.2A
◆Analog output (4～20mA) (optional)
|
Pressure range
|
-0.1…0~0.01…100MPa
|
|
Accuracy
|
≤±0.5%FS
|
|
Stability
|
≤±0.5% /year
|
|
Display accuracy
|
±0.1%FS
|
|
Display method
|
4 digits 0.36" digital tube 2 LED lights
|
|
Display range
|
-1999~9999
|
|
Power range
|
18VDC~30VDC
|
|
Power effect
|
≤±0.1%FS
|
|
Maximum power consumption
|
< 3W
|
|
Lead way
|
M12 industrial connector
|
|
Output mode
|
Two-way switch + one-way analog
|
|
Load capacity
|
<24V1.2A
|
|
Protection class
|
IP65
|
|
Switch life
|
>1000000 times
|
|
Ambient temperature
|
-25℃~70℃
|
|
Medium temperature
|
-25℃～85℃
|
|
Storage temperature
|
-25℃～85℃
|
|
Relative humidity
|
0~80%
|
Size and installation
1 (red) power + 2 (black) power- 3 (white): analog output 4 (blue): switch 1 5 (green) switch 2
Company and Certificates
Hot Searches
