- Product Details
- {{item.text}}
Quick Details
-
Material:
-
Duplex 2205 Stainless Steel
-
Finish:
-
PSS, SSS, Black
-
Application:
-
Swimming Pool Fence, Railings
-
Glass thickness:
-
8mm-12mm
-
Usage:
-
Glass Door Lock
-
Lock Type:
-
Magnetic Lock
-
Cap Feature:
-
No Exterior Fixing Hole
-
Mounted:
-
Glass Mounted
-
Type:
-
Single Open
-
Certification:
-
AZUMA
Quick Details
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
JT
-
Product Name:
-
Swimming Pool Fence Glass To Glass Door Latch
-
Material:
-
Duplex 2205 Stainless Steel
-
Finish:
-
PSS, SSS, Black
-
Application:
-
Swimming Pool Fence, Railings
-
Glass thickness:
-
8mm-12mm
-
Usage:
-
Glass Door Lock
-
Lock Type:
-
Magnetic Lock
-
Cap Feature:
-
No Exterior Fixing Hole
-
Mounted:
-
Glass Mounted
-
Type:
-
Single Open
-
Certification:
-
AZUMA
Australia Duplex 2205 Stainless Steel Frameless Swimming Pool Fence Glass To Glass 180 Degree Side Pull Latch
| Product Name | Glass To Glass 180 Degree Side Pull Latch |
| Material | Duplex 2205 Stainless Steel |
| Finish | Polish, Satin, Matt blace |
| Function | No Exterior Fixing Hole |
| Application | Fixed For Swimming Pool Fence Glass Panel |
| Glass Thickness | 8-12mm |
| Lock Type | Magnetic Lock |
Glass To Glass 180 Degree Side Pull Latch
- Side-pull latch cap with no exterior fixing holes.
- 316 stainless steel (latch pin in 2205 stainless steel).
- Suits 8mm, 10mm and 12mm Gate Panel and 12mm Latch Panel.
- With invisible pressure plate attached to the U channel allows easy installation.
- No latch hole required in latch panel.
- Hidden fixing feature ensures a neat and stylish look.
- Available in Brushed Stainless, Polished Stainless and Matt Black Finishes.
- Complies with Australian Standards for Pool Fencing.
Installation
1. Remove the polymer cap of side-pull by sliding vertically as shown. Loosen both screws and remove the cap base. Install stainless steel backing plate on gate panel.
2. Install another half of the backing plate for latch panel, align both backing plates for the latch to be level.
3. Re-install the cap case and check for alignment, suggest the gap between two cap base is 5mm. Slide back the polymer cap to finish the installation.
