* 1/2”, 3/4” or 15mm, 20mm
Standards
* ISO 4064 Class B
Features:
* Small in size and light in weight.
* Magnetic drive with lower transmission resistance.
* Magnetic shield provides resistance to external magnet interference.
* Digital Showing mechanism, easy to read, button design to change the LCD, more information could be check
* Register can rotate 360° for easy reading in any position.
* Multi available communication data transfer way, like RS485/M-Bus/Pulse Output
* Low voltage, Magnet attack and Leakage alarms warning.
* Maximum Working Temperature:
40 C for cold potable water meter.
90 C for hot：potable water meter.
* Maximum Working Pressure : 16Bar
* Body: Corrosion Proof Copper Alley
* Coupling Threads: BSP
* Magnet attack alarm will be generate once magnet close the shell and cause the hall signal
Installation Requirements:
* The pipeline must be flushed before meter installation.
* The meter suggest to be installed according to the arrow direction indicated on the meter body, the accuracy rate in horizontal
is Class B and in vertical is Class A.
* The meter should be installed in horizontal position with dial face up.
* The meter should be constantly full of water during operation.
Maximum Permissible Error:
In the lower zone from Qmin inclusive up to but excluding Qt is ± 5%.
In the upper zone from Qt inclusive up to and including Qmax is ± 2%.
In the lower zone from Qmin inclusive up to but excluding Qt is ± 5%.
In the upper zone from Qt inclusive up to and including Qmax is ± 2%.
