- Product Details
- {{item.text}}
Quick Details
-
Certification:
-
ISO9001/CE/TUV/From-E
-
Designer head:
-
5-180 m
-
Traffic:
-
0.0054-0.689 m/s
-
The output:
-
0.6-851 kw
-
Design speed:
-
145-1920 r/min
-
The power of generator:
-
0.3-800 kw
-
Rated speed:
-
500-1500 r/min
-
Driving mode:
-
Straight league,Between the united
-
Diameter:
-
75-350 mm
-
keyword:
-
yellow
-
type:
-
water power
Quick Details
-
Place of Origin:
-
Sichuan, China
-
Brand Name:
-
forster
-
Model Number:
-
XJ13
-
Certification:
-
ISO9001/CE/TUV/From-E
-
Designer head:
-
5-180 m
-
Traffic:
-
0.0054-0.689 m/s
-
The output:
-
0.6-851 kw
-
Design speed:
-
145-1920 r/min
-
The power of generator:
-
0.3-800 kw
-
Rated speed:
-
500-1500 r/min
-
Driving mode:
-
Straight league,Between the united
-
Diameter:
-
75-350 mm
-
keyword:
-
yellow
-
type:
-
water power
10Mini Jetting Turbine Hydro Power Plant Sale For Homes
Turgo Turbine
Turgo turbine is one of impulse turbine, applicable water head 30 to 300 meter. The center of jet flow with runner gyration plane angled 22.5°. the water flow contracted by the spray nozzle , flows entering one side of runner and comes out from other side.
Horizontal unit has the advantages of simple structure,convenient repair,reduce the plant height,advantages in reducing excavation depth.
The vertical unit with plant plane size small,a runner can be provided with a plurality of nozzles,(at most can be installed six nozzles),high specific speed,the same size as units of capacity is relatively small,light weight and so on.
Working Principle
When water flows from the pressure foray into the turbine nozzle through pipe, its potential energy is converted to kinetic energy by the nozzle. The high speed water jet comes out from the nozzle strikes at the buckets (blades) at a certain angle (not in a tangential direction) against the rotating surface of the runner. The water flows into the propeller (turbine runner) from one side and flows out from other side.
In a Turgo, the runner is less expensive to make than a Pelton Wheel and does not need an airtight housing like the Francis. It also has a higher specific speed, handling a greater flow than the Pelton Wheel. This leads to a reduced generator and installation cost. Turgos operate in a head range where the Francis and Pelton overlap.
Application Situation
| River Dam | Mountain Foot |
|
|
Key components or supporting equipment
| 1.Wear-resistant Stainless Steel Runner | 2.Automatic Valve |
| 3. High Hydraulic Microcomputer Governor |
4. 5 in 1 Integrated Control Panel |
Technical Specifications
|
Power range
|
100KW-2000KW
|
|
Water head
|
60m - 270m
|
|
Water Flow
|
0.166 m3/s - 1.840 m3/s
|
|
Material
|
Steel plate/Stainless steel
|
|
Speed range
|
600rpm-1000rpm
|
|
Installation method |
Horizontal installation / vertical installation
|
|
Frequency
|
50hz/60hz
|
|
Efficiency
|
87%-93%
|
|
Application
|
On-grid/Off-grid
|
| Low Head High Flow Francis Turbine | High H ead Low Flow Turgo Turbine |
| Power 100KW to 5000KW | Power 300KW to 5000KW |
| Water Head 12m to 290m | Water Head 150m to 700m |
| Water Flow 0.98 m3/s - 36.26 m3/s | Water Flow 0.1005 m3/s - 2.884 m3/s |
| Advantage | A dvantage |
|
1. The difference in operating head can be extra simply controlled in Francis turbine than in
Pelton wheel turbine. 2. Ratio of utmost and least operating head can be even be two in case of Francis Turbine. 3. Mechanical efficiency of pelton wheel decrease faster by wear than Francis turbine. 4. Francis turbine variation in operating head can be more simply controlled. 5. No head failure occurs still at low discharge of water. |
1.Pelton turbine has simple construction
2.Pelton turbine is east to maintain 3.Intake and exhaust of water takes place at atmospheric pressure hence no draft tube is required 4.No cavitation problem 5.Its overall efficiency is high 6.Pelton turbine can be both axial and radial flow 7.Pelton turbine can work on low discharge |
