heavy duty construction adhesive Jebsen High Quality Power Fix Adhesive Glue for Ceramic Wall and Floor Tiles for renovation

Product Description

JEBSEN Power Fix suitable for fixing ceramic wall & floor tiles, Vitrified Homogeneous Tile, Porcelain, Marbles, Granite, Terrazzo, Decorative stone and etc. Suitable to use on wall and floor dry or wet, interior or exterior areas. Perfect for installation of large size porcelain, granite and marble tile. Can bond large tiles to walls without the likelihood of sinking or sagging.

Jebsen Power Fix

Suitable for fixing ceramic wall & floor tiles, Vitrified Homogeneous Tile, Porcelain, Marbles, Granite, Terrazzo, Decorative stone and etc. Suitable to use on wall and floor dry or wet, interior or exterior areas. Perfect for installation of large size porcelain, granite and marble tile. Can bond large tiles to walls without the likelihood of sinking or sagging.

Preparation

1. The surface to be tiled must be flat, sound and free from oil, grease and dust.

2. Loose, flaking material such as paint droppings, plaster etc., must be removed by wire brushing.

3. Brickwork, concrete or other porous surfaces should be slightly clamped to reduce suction.

Method of Use

1. Add powders to water in a clean vessel and stir continuously until a slump-free mortar is obtained.

2. Apply the adhesive with a suitable tiling trowel.

3. Press tiles firmly into the adhesive bed to ensure good contact with back of each tile. Do not allow adhesive to skin over before tile is applied.

4. For flat surfaces, the adhesive should be applied to a thickness of approximately 3 mm.