High Quality Hydraulic Drive High Position Engine And Gearbox Transmission Jack Manual Lifting Type For Car Fast Repair Tools

Hydraulic Transmission Lifting Jack

USING INSTRUCTIONS

1. Use a post lift or scissor lift to lift the car to a certain height. 2. Push the hydraulic transmission jack under the car, and lift the hydraulic transport lift to a suitable position, remove the items to be repaired (such as: gearbox, engine, drive shaft, front and rear axles, etc.) and place them in the saddle Then use a steel chain to fasten the object, release hanle valve, and put the bracket and the object to the min position. 3. Push the hydraulic transmission jack to the required position, and use a crane to lift the object for maintenance. 4. After the object been repaired, use a crane to lift the object and place it in the saddle of the bracket, fasten the object with a steel chain, and push the hydraulic lift to the appropriate position under the car. 5. Close the release valve, step on the oil cylinder to lift the object arrive a proper position, and install the item. If the object is not in the right position, you can move the hydraulic transport lifter or adjust it through the adjustment handwheel under the bracket.

SHIPPING METHOD

Due to this machine is a little heavy, the shipping cost showed on this link may be not very correct, you can leave us message , tell us your specific address, we will find the best shipping method for you In general , Customers bear import duties and cooperate with customs clearance