- Product Details
- {{item.text}}
Quick Details
-
Packing:
-
customized
-
classification:
-
Spray adhesive
-
temperature resistance:
-
50-60 degrees
-
Voc:
-
None
-
Oder:
-
low
-
bonding Power:
-
strong
-
application tools:
-
spray gun
Quick Details
-
CAS No.:
-
7085-85-0
-
Place of Origin:
-
Guangdong, China
-
Color:
-
Clear,White,Yellow
-
Packing:
-
customized
-
classification:
-
Spray adhesive
-
temperature resistance:
-
50-60 degrees
-
Voc:
-
None
-
Oder:
-
low
-
bonding Power:
-
strong
-
application tools:
-
spray gun
Fire retardant spray adhesive non flammable glue for foam mattress
Product Data
|
Appearance |
light yellow viscous liquid |
|
Viscosity |
90±40 mPa. S/25°C |
|
Solids Content |
32±2% |
|
Shear Strength |
30 minutes ≥ 0.6 mpa |
|
|
48 hours ≥ 1.0 mpa |
|
Specific Gravity |
0.78kg/L |
|
Drying times |
5 - 15 minutes |
|
Coverage |
185-250g/m2 |
|
VOC |
≤ 200 g/L |
|
Initial bonding power |
≥0.6 Mpa |
|
Directions for use |
||
|
Surface preparation |
1.Surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. 2.Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere.
|
|
|
Recommended apply system
|
Spraying |
Apply the adhesive evenly on the two bonding surfaces with spray gun and the consumption is 185-250g/m2. Spray gun with an opening of 2.0-2.5 mm and 0.3-0.5 Mpa air pressure is recommended. |
|
Thickness control |
the adhesive should be applied evenly and not too thick to avoid the weakening of the bonding strength. But for porous materials or materials with coarse surface, you can apply more accordingly.
|
|
|
Airing |
After application of the adhesive, enough time should be given to let the solvent evaporate completely to avoid bubble or stickiness. The airing time is about 5-15 minutes/25C and varies from the temperature, humidity and adhesive film. The bonding can be done after the surface is dry by touch. For porous materials, you can bond directly after application of the adhesive.
|
|
|
Bonding |
The application should be done once and for all. Aim the two surfaces, bond together and press. Don’t move the bonding surfaces back and forth, or the bonding effect will be affected.
|
|
|
Remarks |
||
|
1. Seal it tightly and store it in a cool and well-ventilated place where the temperature is between 5 ℃ -35 ℃ and the relative humidity is ≤80%. Don’t expose it under the sun. 2.Volatile solvent contained. Do not swallow. Keep it far away from open fire because of volatile solvent in it which is inflammable and out of reach of the children. The room should be well-ventilated during application. 3.No. of Regulation On Transporting Dangerous Goods: 32196 |
||
