- Product Details
- {{item.text}}
Quick Details
-
Type:
-
FAUCET ADAPTER
-
Place of Origin:
-
China
-
Brand Name:
-
huben
-
Model Number:
-
HD-ZNJSQ-02
-
Product Name:
-
AUTO WATER SENSOR FAUCET
Quick Details
-
Project Solution Capability:
-
NONE
-
Application:
-
Kitchen
-
Design Style:
-
Modern
-
Type:
-
FAUCET ADAPTER
-
Place of Origin:
-
China
-
Brand Name:
-
huben
-
Model Number:
-
HD-ZNJSQ-02
-
Product Name:
-
AUTO WATER SENSOR FAUCET
Product Description
DOUBLE SENSING MODES
Side Sensor Meets Water Storage Requirements
When the sensor enters the side sensing area (within a limited distance of 5 cm), the water began to flow out. The current lasts
for three minutes, and the water remains flow out even if the sensory object leaves. If the sensor enters the side sensing area
again during the water flow process, the water can be stopped at any time
for three minutes, and the water remains flow out even if the sensory object leaves. If the sensor enters the side sensing area
again during the water flow process, the water can be stopped at any time
Innovative technoloay design
Innovative technology design, using MCU algorithm and pulse interval sampling to optimize the infrared induction, reduce product energy consumption and ensure the consistency and stability of the product use din a complex environment.
Innovative technology design, using MCU algorithm and pulse interval sampling to optimize the infrared induction, reduce product energy consumption and ensure the consistency and stability of the product use din a complex environment.
Air injection technique
Air injection technology increases the proportion of air in the process of water out, making the water spray soft and delicate, with more scouring power. At the same time, reduce the time of not being used effectively, so that the water flow rate reachec 0.07L/S. Water saving and environmental protection
Air injection technology increases the proportion of air in the process of water out, making the water spray soft and delicate, with more scouring power. At the same time, reduce the time of not being used effectively, so that the water flow rate reachec 0.07L/S. Water saving and environmental protection
More adapters
6 kinds of adapters, suitable for common mainstream faucets in the market，
- Internal Thread Connector M20 x 1 - Internal Thread Connector M22 x 1 - Internal Thread Connector G1/2 x 1 - External Thread
Connector M20 x 1 - External Thread Connector M22 x 1 - External Thread Connector M24 x 1
6 kinds of adapters, suitable for common mainstream faucets in the market，
- Internal Thread Connector M20 x 1 - Internal Thread Connector M22 x 1 - Internal Thread Connector G1/2 x 1 - External Thread
Connector M20 x 1 - External Thread Connector M22 x 1 - External Thread Connector M24 x 1
Specification
|
item
|
value
|
|
After-sale Service
|
NONE
|
|
Project Solution Capability
|
NONE
|
|
Application
|
Kitchen
|
|
Design Style
|
Modern
|
|
Place of Origin
|
China
|
|
Brand Name
|
huben
|
|
Model Number
|
HD-ZNJSQ-02
|
|
Type
|
FAUCET ADAPTER
|
|
Product Name
|
AUTO WATER SENSOR FAUCET
|
Packing & Delivery
weight:0.26kg
packing dimension:195*130*140mm
24PCS/CARTON
CARTON WEIGHT: 8.6KG
CARTON SIZE: 46*38*27CM
Features: Advantages: Package Included :
1. Upgrade double sensor for faucet, two sets of sensing areas, two water modes, 0.25 second fast induction
2. Drains water inductively by IR, reducing touch pollution
3. First-class water efficiency, energy saving and environmental protection
4. Simple design style, adapt to various home styles
5. 6 sets of adapters, meet your different needs.
2. Drains water inductively by IR, reducing touch pollution
3. First-class water efficiency, energy saving and environmental protection
4. Simple design style, adapt to various home styles
5. 6 sets of adapters, meet your different needs.
Inductively drains water
Water saving
Convenient to disassemble and assemble
Super long battery endurance
Water overflow protection
IPX6 Waterproof
Water saving
Convenient to disassemble and assemble
Super long battery endurance
Water overflow protection
IPX6 Waterproof
1 x Infrared Induction Water Saving Device For Faucet
1 x Installation Wrench
3 x Seal Rings
6 x Adapters
1 x Installation Wrench
3 x Seal Rings
6 x Adapters
FAQ
NOTE:
1.Long-term storage of the product will cause a certain amount of power loss, and there may also be a situation where the power is exhausted. Therefore, we recommend: fully charge before the first use to obtain a longer use experience.
2.When charging, the indicator light flashes; when the charging is completed, the indicator light goes out.
3.Due to the extremely low usage rate of the USB cable and it is a general-purpose product for electronic equipment, in order to reduce the waste of resources, so the USB cable is not included in the package
Product installation:
Retain the original faucet，Remove your original faucet aerator, select the appropriate connector in the set and screw it in (6 sets of connectors included), the main unit is pushed upwards, when you hear a click, the installation is complete
How to disassemble the water saver:
refer to the picture on the right
It is recommended to keep the wrench in the package. If you need to remove the water saver for charging, place the wrench between
the adapter and the self-locking ring, press the self-locking ring, and move the wrench upward to easily remove the water saver.
1.Long-term storage of the product will cause a certain amount of power loss, and there may also be a situation where the power is exhausted. Therefore, we recommend: fully charge before the first use to obtain a longer use experience.
2.When charging, the indicator light flashes; when the charging is completed, the indicator light goes out.
3.Due to the extremely low usage rate of the USB cable and it is a general-purpose product for electronic equipment, in order to reduce the waste of resources, so the USB cable is not included in the package
kinds of adapters, suitable for common mainstream faucets in the market
COMPATIBILITY CHECK ！！！ ：
1.Before purchasing, please check whether your faucet interface is suitable for installation！ or you can consult us in here, we will be happy to answer any questions about the product for you.
2.Our products are only suitable for faucets with the above 6 mainstream interfaces. If your faucet interface is not within the range of the above 6 interfaces, you need to purchase a connector suitable for your faucet interface separately, connect to one of the above 6 types of connectors, and then Can be installed and used.
COMPATIBILITY CHECK ！！！ ：
1.Before purchasing, please check whether your faucet interface is suitable for installation！ or you can consult us in here, we will be happy to answer any questions about the product for you.
2.Our products are only suitable for faucets with the above 6 mainstream interfaces. If your faucet interface is not within the range of the above 6 interfaces, you need to purchase a connector suitable for your faucet interface separately, connect to one of the above 6 types of connectors, and then Can be installed and used.
Product installation:
Retain the original faucet，Remove your original faucet aerator, select the appropriate connector in the set and screw it in (6 sets of connectors included), the main unit is pushed upwards, when you hear a click, the installation is complete
How to disassemble the water saver:
refer to the picture on the right
It is recommended to keep the wrench in the package. If you need to remove the water saver for charging, place the wrench between
the adapter and the self-locking ring, press the self-locking ring, and move the wrench upward to easily remove the water saver.
Important Hint: Do not violently disassemble, so as to avoid product damage!
Hot Searches
