STEP-1: Open the package, take out the lamps and accessories, check whether the accessories are complete. If the lens is damaged,please find the supplier to replace it in time
STEP-2 :Use 4# hexagonal wrench to install the support rod on the lamp body with
flat head screws (m6x12) (see Figure 1), fix the support rod on the other side in the same way (see Figure 2), and lock the sleeve
on the support rod with 4pcs flat head screws (see Figure 3)
flat head screws (m6x12) (see Figure 1), fix the support rod on the other side in the same way (see Figure 2), and lock the sleeve
on the support rod with 4pcs flat head screws (see Figure 3)
STEP-3 Wiring: the black line is connected to the live line of thepower grid, the white line is connected to the zero line of the power grid, and the green line is connected to the ground wire ofthe power grid
STEP-4 Fixing the lamp body: use 4# hexagonal wrench to fix the lamp body on the lamp pole with 4pcs machine meter
screws (m8x12) (applicable lamp pole diameter: 45-60mm)
screws (m8x12) (applicable lamp pole diameter: 45-60mm)
