- Product Details
- {{item.text}}
Quick Details
-
Voltage:
-
12-12v
-
Place of Origin:
-
shenzhen
-
Brand Name:
-
OEM
-
Model Number:
-
B2B1260
-
B2B charging current:
-
12V, 60A
-
Max.charging power:
-
780w
-
Input voltage:
-
10.5-16.0v
-
Charge Battery type:
-
GEL,Sealed,Flooded,LiFePO4,Lithium-ion
-
Product size:
-
19*19.4*7cm
-
Box Size:
-
29*24*13cm
-
Weight:
-
1.9KG/Box
-
1 Carton:
-
10pcs/18kg
-
Carton Size:
-
59*39*28cm
Quick Details
-
Function:
-
battery charger
-
Car Fitment:
-
Effedi
-
Connection:
-
blue-tooth
-
Voltage:
-
12-12v
-
Place of Origin:
-
shenzhen
-
Brand Name:
-
OEM
-
Model Number:
-
B2B1260
-
B2B charging current:
-
12V, 60A
-
Max.charging power:
-
780w
-
Input voltage:
-
10.5-16.0v
-
Charge Battery type:
-
GEL,Sealed,Flooded,LiFePO4,Lithium-ion
-
Product size:
-
19*19.4*7cm
-
Box Size:
-
29*24*13cm
-
Weight:
-
1.9KG/Box
-
1 Carton:
-
10pcs/18kg
-
Carton Size:
-
59*39*28cm
All-automatic battery charger
-----
for motor homes and intervention vehicles
Features
This is a all-automatic DC-DC battery charger, you can use the battery (12V) to charge the battery (12V) (B2B), specially designed for RVs, exposed cars, campers, ships, etc.
B2B126030: 12V-12V/60A BS123020: 12V-12V/30A
Technical Data
| B2B1260 | B2B1230 | |
| Main battery " Bord " | ||
| Lead-Acid, Gel, AGM Batteries Nominal Voltage | 12V | 12V |
| LiFePO4 Nominal Voltage | 12.8V | 12.8V |
| lithium - ion ( NCM ) Nominal Voltage | 11.1V | 11.1V |
| Capacity (Battery Size), recommended: | 90-560AH | 45-280AH |
| Vehicle Starter Battery "Start II": | ||
| Vehicle Starter Battery Nominal Voltage: | 12V | 12V |
| Min. Battery Capacity (Size), recommended: | 100AH | 60AH |
| 12 V / 12 V B2B Charging operation | ||
| Input Voltage Range "Start II" ,"D+" controlled: | 10.5-16V | 10.5-16V |
| Maximum charging power: | 780W | 390W |
| " Bord " Max. charge current | 60A | 30A |
| Activation Control Input "D+" | 8-16V | 8-16V |
|
Signal Output "OK/TR", Switch Position "TR",
Cutoff Relay Bypass/max |
12V/1A | 12V/1A |
| Signal Output "OK/TR", Switch Position "OK" | 12V/1A | 12V/1A |
| Input "T T" for Battery Temperature Sensor "Board I": | YES | YES |
| " Ss-" "Ss+" Inputs Sensor Cables "-" and "+" for Battery "Board I": | YES | YES |
| stand-by current | 24mA | 24mA |
| Main battery overvoltage protection | 15.5V | 15.5V |
| weight | 1.6kg | 1.44kg |
| demension | 190×215×70mm | 190×194×70mm |
| Operating temperature | -20-50 ºC | -20-50 ºC |
B2B
Operation
mobile operation from dynamo and starter battery (Battery to Battery):
it refers to charging the main battery through dynamo and starter battery, .If it is not used in the Vehicle , you can also use one battery (12V) to charge another
- . The efficient charging converter (booster) allows full charging of the board battery during driving.
- . It increases/reduces the voltage to the level, which is required for precise charging of the board battery with the optimum characteristic line of charging.
- . The simultaneously supplied 12 V consumers are protected against overvoltage and voltage fluctuations.
Further Characteristics of the Unit
- The output voltage is stabilized, free of peaks, smoothed and filtered.
- Galvanic isolation between input and output:
- No overvoltage at the output and thus protection of the consumer if the ground line is lost.
- Clean, undisturbed mass ratios, even with long supply lines.
- Stable operating voltage on site in mobile operation, e.g. Containers, trailers, roll containers etc.
- Filtering and suppression of disturbances on the input to the output side.
- Fully automatic continuous operation: The DC-DC converter can constantly work with the battery
- Surveillance-free operation: multiple protection against overload, overheating, over voltage, short circuit, Misconduct and deep discharge of the battery through electronic regulation to complete
- Switch off by built-in safety switch.
Security guidelines
Intended use:
The DC-DC converter was built on the basis of the valid safety guidelines. The use may only be:
- On lead-acid, lead-gel or lead AGM or LiFePO4 batteries of the specified nominal voltage.
- With the specified cable cross-sections for inputs and outputs.
- With fuses of the specified strength near the battery to protect the wiring between the batteries and DC-DC converter connections.
5. In a well-ventilated room, protected against rain, moisture, dust and aggressive battery gases as well as in a non-condensing environment.
The device must never be used in places where there is a risk of gas or dust explosion consists!
