- Product Details
- {{item.text}}
Quick Details
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Zhanlida
-
Model Number:
-
304 screw glue
-
Type:
-
Threadlocker screw glue
-
name:
-
Threadlocker screw glue
-
color:
-
clear
-
capacity:
-
50ml/250ml
-
application:
-
different kinds of screw
Quick Details
-
CAS No.:
-
Threadlocker screw glue
-
Other Names:
-
Threadlocker screw glue
-
MF:
-
Threadlocker screw glue
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Zhanlida
-
Model Number:
-
304 screw glue
-
Type:
-
Threadlocker screw glue
-
name:
-
Threadlocker screw glue
-
color:
-
clear
-
capacity:
-
50ml/250ml
-
application:
-
different kinds of screw
Title goes here.
High strength, can be used for circular fixation or permanent locking and sealing of threads below M36!
Title goes here.
1、 Product performance and packaging specifications
1) Color: Transparent
2) Viscosity: 300-800cps (25 ℃)
3) Filling gap: 0.13mm
4) Curing time: 20 minutes
5) Breaking torque: 20N M6) Average disassembly torque: 25N M7)
Packaging specification: 50ml 250ml 1KG Shelf life: 12 months
screw glue information
2、 Application: Suitable for thread locking and sealing of electronic and mechanical products, as well as tight viscosity of two metal surfaces. High strength, can be used for cylindrical fixation or permanent locking and sealing of threads below M36.
Set the position of the nut for bonding, and the glue will drip along the gap between the screw and nut
After dripping the glue, rotate the nut to move it approximately to the height of the nut
Nut reset, can be put into use in 4 hours, fully cured in 24 hours
Usage Guide
Use adhesive cleaning agent to clean the inner and outer surfaces of the material and dry it. It can enhance the adhesive strength
If the material is an inert metal or the curing speed is too slow, use our catalyst 7649 and let it dry. For a smooth fit, simply apply a circle of adhesive to the guide angle of the screw and nut, rotate during assembly to ensure good coating. For a press fit, both bonded surfaces need to be coated with adhesive and assembled under appropriate high pressure. For a hot fit, the adhesive should be applied to the bolt, and then the screw should be heated to create enough clearance for free assembly. Do not apply any adhesive to the screw component until the component reaches sufficient operating strength
Hot Searches
