- Product Details
- {{item.text}}
Quick Details
-
Light Source:
-
LED
-
Place of Origin:
-
Zhejiang, China
-
Brand Name:
-
M-alite
-
Power:
-
3-50W
-
Voltage:
-
AC100-240V
-
Battery:
-
Li-ion
-
Charge time:
-
24 Hours
-
IP:
-
IP20
-
Working time:
-
120mins
-
Battery Capacity:
-
3.7V 2600MA
-
Certification:
-
ce
Quick Details
-
Battery Type:
-
Li-ion
-
Material:
-
Aluminum
-
Use:
-
led panel light; led down light
-
Light Source:
-
LED
-
Place of Origin:
-
Zhejiang, China
-
Brand Name:
-
M-alite
-
Power:
-
3-50W
-
Voltage:
-
AC100-240V
-
Battery:
-
Li-ion
-
Charge time:
-
24 Hours
-
IP:
-
IP20
-
Working time:
-
120mins
-
Battery Capacity:
-
3.7V 2600MA
-
Certification:
-
ce
Specification
|
Setting Information
|
|
|
|
Model
|
AE02
|
|
|
Rated voltage
|
100-240V
|
|
|
Power
|
3-50W
|
|
|
Battery
|
2600 mAh 11.1V
|
|
|
Emergency Time
|
120mins
|
|
|
Raw Materials
|
Aluminum
|
|
|
Battery Type
|
Li-ion
|
|
|
Size
|
130*58*22mm
|
|
Applications
Product Description
This emergency kit accords with IEC 61347-2-7:2011 & IEC 61347-1:2007 + A1:2010 +A2:2012.
It is suitable for all 3-50W LED lamps with external driver (Such as led panel light /led downlight etc）. It can be used in public places to ensure LED lights work normally when power failures suddenly because of fire and earthquake and etc.
This emergency kit would not influence its environment and power around when it works.
|
Material
|
Aluminium
|
|
Input Voltage
|
AC 85-AC277V，50HZ/60HZ
|
|
Emergency time
|
1-3hours
|
|
Emergency conversion time
|
Less than 0.1Sec
|
|
Charging time
|
24h
|
|
Emergency output Voltage
|
DC 20- 74V
|
|
Battery model
|
Li-ion
|
|
LED charging indicator
|
Green
|
|
Test switch
|
Yes
|
|
Protection
|
Over-charge/Over-discharge/Shirt circult
|
|
Emergency Mode
|
Constant Power
|
|
Output power
|
3-5W
|
|
Inverter dimensions
|
155×40×30mm
|
Battery and light source：
◆
Battery:
in normal occasion, please change battery when discharging time is less than 100 minutes after being charged for 24 hours or battery leakage When changing battery, Cut of the main power, take apart the lamp, removing the battery plug and replace the old one with a new battery of same specification ,then the driver will be OK. Usually the lifespan of battery can be more than 3years.
◆ Note: The positive and negative of battery should not be connected reverse, and we should avoid directly short-circuit the battery. Explosion will be caused if using unmatched battery. Please abide by local rules when discarding old battery.
◆ Light source: 3-50W LED lamps with external driver, please change to the same light source if light source is broken or brightness is not enough.
◆ Warning: As the inner PCB includes 220V/50HZ high voltage, so it must be unloaded/opened ONLY by professional technical.
◆ Note: The positive and negative of battery should not be connected reverse, and we should avoid directly short-circuit the battery. Explosion will be caused if using unmatched battery. Please abide by local rules when discarding old battery.
◆ Light source: 3-50W LED lamps with external driver, please change to the same light source if light source is broken or brightness is not enough.
◆ Warning: As the inner PCB includes 220V/50HZ high voltage, so it must be unloaded/opened ONLY by professional technical.
Indicator Light：
Dimension：
Maintenance：
1. It should be connected according to the wiring diagram on the emergency kit’s surface strictly
2. When connecting to AC power, see if it works normally, at this time, green indicating light is on. At the same time, red indicating light would be on too, but it will be off after full charged. Two status of LED lamp:
• The LED lamp is off when its own driver is not connected 220V AC power;
• The LED lamp if on when its own driver is connected 220V AC power
3. Press the test button, the emergency kit enters the status of simulation of power failure. At this time, the indicating light of main power (green) and charging (red) is off, while the emergency indicating light (blue) is on, it is in emergency status, and the LED lamp is working, but the brightness is not so high. After loosing the button, it will return to main power status again.
4. Cut off the emergency kit input switch, the LED lamp will be in emergency status.
5. Cutting off the LED lamp’s connection to the emergency kit in emergency status, the emergency kit will stop supplying power to the LED lamp, the emergency indicating light would be off.
* Finishing installation after ensuring all are normal after testing.
* After testing the above steps, if OK, installation is finished.
6. Keeping a record of maintenance and maintaining the emergency kit and LED lamp regularly
7. Checking regularly to ensure its lifespan and usage.
PARTS QC REPORT FOR OUR EMERGENCY KITS
Hot Sales
Certifications
Hot Searches
