car plastic rubber coating BUMPER CRYSTAL 1L by SENSHA

Features and Benefits

Restore the original luster of the mold bumper!!

BUMPER CRYSTAL is a regenerant of gloss of plastic malls and bumpers and establish the ultra-hard glossy glass coating films on them. This product is different compared to other mall coating products, it is specifically for malls and bumpers to restore their original luster.

It is easy to apply the product without coating unevenness by following the detailed instruction manual attached.

BUMPER CRYSTAL is unlike other wax or coating products, malls and bumpers will not be whiten again after times passed from an application because BUMPER CRYSTAL maintains glossy looks for long time by creating the clear and hard glass coating film.

Why so super Glass type film-forming coating agent is?

9H hardness glass coating layer is never deteriorated

The majority of mall and bumper wax and coating products (both personal and business uses) utilize petroleum as a main ingredient. Petroleum-based solvents are similar to tire wax and cannot avoid oxidization and deterioration.

If those coatings are degraded by oxidization, they will be eventually removed by rain, furthermore, the remaining coatings create oily films so that a condition can be worse than before applying those petroleum-based products.

BUMPER CRYSTAL establishes the inorganic clear 9H hardness glass coating layer and it will never be oxidized and deteriorated hence problems petroleum-based products will never occur for glass coating products.

Remarkable durability

One application lasts for 6 months!

Glass base bumper coating will not cause oxidation and deterioration. Both hydro-repellent and gloss will last more than six months from the application. With the hard coating, it will be difficult to scratch and with water repellent, you will enjoy washing your car.

It can be installed on the following parts. The capacity is sufficient for coating even cars with many unpainted plastic parts.

IMPORTANT NOTE

The product is for rough unpainted plastic materials, such as malls and bumper. It cannot be used on clear materials such as door visor and headlight.

It cannot be used for soft materials. It may cause cracks.

If the application is too thick (by one application), it may create cracks.

After the application, please wipe off the surface.

Do not leave the application without wiping.

Please clean your car before application. If you apply this product on top of dirt, they cannot removed after the application.

The coating is very strong. It will be impossible to remove the coating when it is cracked or containing dirt. Please avoid using the product in the heat such as in direct sunlight.

Please also make sure the application surface is not too hot.

It will take approximately 6 hours to dry. Please do not drive the car and avoid the car getting wet.

The product will harden when contacting air.You cannot keep the product for long time after opening. Please finish using the product by applying 2-3 times. This will be very effective.

Please read the instructions carefully before using.

Be sure to read before purchasing

This product is an unpainted plastic-only coating agent, but there is a concern that it may not be compatible with some vehicle models and unevenness may occur.

Before application, be sure to test the application in an inconspicuous area, after you are sure do the application on entire areas.

We are loved by the world

In Asia, Europe, Middle East and Africa. Our quality proven in about 34 countries around the world and around 800 branches.