Anti rust corrosive for marine coast wharf epoxy resin painting sea water resistant epoxy paints

Anti rust corrosive for marine coast wharf epoxy resin painting sea water resistant epoxy paints

FOB Reference Price: Get Latest Price

≥500 Sets

US $30

Free Inquiry

Customized Request

Product Details

{{item.text}}

Quick Details

EINECS No.:: 500-033-5

Place of Origin:: Taiwan, China

Brand Name:: FASTFIX

Model Number:: FX-EC502

Length:: 8 cm

N. Weight:: 50 grams

Finish color:: White

Material:: Pure epoxy

Shelf life:: 24 months

Working time:: 30 minutes

Full curing:: 24 hours

Hardness Shore D:: 82

Compressive strength:: 7295

Shrinkage:: <1%

Quick Details

CAS No.:: Mixture

Other Names:: Epoxy Adhesive

MF:: Mixture

EINECS No.:: 500-033-5

Place of Origin:: Taiwan, China

Brand Name:: FASTFIX

Model Number:: FX-EC502

Length:: 8 cm

N. Weight:: 50 grams

Finish color:: White

Material:: Pure epoxy

Shelf life:: 24 months

Working time:: 30 minutes

Full curing:: 24 hours

Hardness Shore D:: 82

Compressive strength:: 7295

Shrinkage:: <1%

Product Description

Production Name: Epoxy Anti-Corrosion Cladding
Product Code: FX-EC502
Product Description: High performance toughness and self-recovery epoxy coating. FastFix Epoxy Anti-Corrosion Cladding is made by solvent-free liquid epoxy resin, special hardening agent. It can cure both in the water and on the land.

Uses:
Applicable to the coast, wharf facilities of steel and concrete which are long-term exposure to seawater or under sea water area.

Advantages:
1. Underwater-workable, easy coating, and strong adhesion.
2. Low contraction after curing, the surface is flat without bubbles after construction.

3. Excellent wear resistance, impact resistance.

4. Excellent performance of anti-seawater, alkali and solvent resistance.

5. Salt spray resistance record at least up to 1440 hours.

Application

How to Use:

1. Clean the equipment before use

2. To blend the hardener into main agent according to the provisions of the ratio, and using a mixer to mix evenly. In the meantime, using a scraper or other tools to remove the unmixed base or hardener carefully.

3. In the middle of mixing, DO NOT mix with any other water.

4. After mixing, soak the hands, apply a small amount of epoxy coating material to coat on the surface, and evenly smear the coating (Wetting manual method).

5. Whether steel, aluminum, stainless steel and concrete, must have the appropriate surface roughness.

6. All substrates should be clean and free from dirt and dirt that may adversely affect adhesion.

7. The construction tools should be washed immediately after using.

Where to Use:

Technical Data

Glossing	Plain glass
Color	Agreement with the customer set
Proportion	1.95 ±0.1Kg/L (mixture)
Viscosity	Paste (mixture), but can be adjusted by diluent for spraying
Working time	Within 30 minutes (mixture @25℃)
Curing time	Finger touch cured within 1 hr / Half cured within 3 hr / Full cured within 7 days (25 ℃)
Film thickness	5 mm or more
Coating interval	No less than 4 hours
Mix ratio	Main agent: hardener = 4: 1 (by visual) \| Main agent: hardener = 4.5: 1 (by weight)
Coating method	Trowel fill, coating
Solid volume	100%
Coverage	8 Kg/㎡ @ 5 mm
Thinner amount	According to the required viscosity adjustment for spraying use
Surface treatment	Steel: Remove any loose rust, dirt, oil or grease from the surface, then apply waterblast or sandblast to the SIS St 2 ↑ after construction (pay attention to certain surface roughness).
Storage stability	Normally, at least one year

Test Item	Test Method	Result
Flexural Modulus (N/mm2)	ASTM D790-10 Procedure A	5617
Tensile strength (N/mm2)	ASTM D638-10 (Type I, V=5mm/min)	33
Flexural strength (N/mm2)	ASTM D790-10 Procedure A	62
Compressive strength (N/mm2)	ASTM D695-10	102
Pull-out test (kgf/cm2)	ASTM D4541-09e1 Type V	46
Salt spray test	ASTM B117-11	No corrosion (sustained test +40 days)