- Product Details
- {{item.text}}
Quick Details
-
Model Number:
-
Y-W2.4
-
Thickness:
-
2.4mm
-
Size:
-
60*90mm, 600*900*2.4mm
-
Model Name:
-
Low Temperature Perforated Thermoplastic Sheet
-
Perforated Rate:
-
5%
-
Feature of splinting sheet:
-
No Sticky/comfty/fixation/well-fitted
-
Color:
-
Original/Red/green/blue
-
Usage:
-
Immobilization& Positioning
-
Application:
-
Radiotherapy/X-ray room
-
Certificate:
-
CE/ ISO13485/ ISO9001/ISO14001
-
Validity:
-
3 years
Quick Details
-
Processing Service:
-
Moulding
-
Place of Origin:
-
Shandong, China
-
Brand Name:
-
Yabin medical
-
Model Number:
-
Y-W2.4
-
Thickness:
-
2.4mm
-
Size:
-
60*90mm, 600*900*2.4mm
-
Model Name:
-
Low Temperature Perforated Thermoplastic Sheet
-
Perforated Rate:
-
5%
-
Feature of splinting sheet:
-
No Sticky/comfty/fixation/well-fitted
-
Color:
-
Original/Red/green/blue
-
Usage:
-
Immobilization& Positioning
-
Application:
-
Radiotherapy/X-ray room
-
Certificate:
-
CE/ ISO13485/ ISO9001/ISO14001
-
Validity:
-
3 years
Products Description
Medical Supplies Orthopedic Reusable Low Temperature Physical Therapy Thermoplastic Splint Sheet
Low-Temperature Thermoplastic Splinting Sheet for Occupational Therapy:
The low-temperature thermoplastic sheet, which is a new environmental-friendly polymer material, is made of a special synthetic polymer polyester (such as PCL) through a series of physical and chemical processing methods. It can be soft in the water when the temperature reaches 65~70℃, then removes from the water after softening and dries on, when its temperature drops to about 40℃, it can be directly molded on the patient’s body, the whole process is easy to operate.
The low-temperature thermoplastic sheet, which is a new environmental-friendly polymer material, is made of a special synthetic polymer polyester (such as PCL) through a series of physical and chemical processing methods. It can be soft in the water when the temperature reaches 65~70℃, then removes from the water after softening and dries on, when its temperature drops to about 40℃, it can be directly molded on the patient’s body, the whole process is easy to operate.
The low-temperature thermoplastic sheet ( orthopedic splint ), which is Light weight, good plasticity, x-ray translucent, latex free, non-toxic, odorless, non-irritating to skin, antimicrobial and environment friendly fully biodegradable, is an ideal material for immobilization.
Yabin can offer you a suitable and good quality of thermoplastic to make any kind of splints like static splints, dynamic splints for upper limb and lower limb, body orthotics, post-operative splints and any brace of orthoses, etc.
It can be partially adjusted by heat gun.
Perforation:
NON-PERFORATION:
Maximum rigidity and support.
Maximum rigidity and support.
1%-Perforation
Slight ventilation and comfort while keeping rigidity.
5%-Perforation
Increased ventilation while still keeping major rigidity.
10%-Perforation
Lightweight, good ventilation for increased comfort and compliance.
30%-Perforation
Lightest weight, best ventilation, more comfortable and compliance.
Tip:
Higher perforations soften quicker when heated and cool faster.
The Higher perforations, The lower rigidity
The Higher perforations, The lower rigidity
Application Field
1. Orthopedics
2. Rehabilitation hospital
3. Burn department
4. Aesthetic and Reconstructive Plastic Surgery
5. ENT department
6. First Aid & Emergency
1. Orthopedics
2. Rehabilitation hospital
3. Burn department
4. Aesthetic and Reconstructive Plastic Surgery
5. ENT department
6. First Aid & Emergency
Feature:
*
Offers good balance between maximum resistance to stretch, moderate drape and good conformability
* Excellent rigidity ideal for medium and large splints
* Shorter harden time time for therapists
* Good memory allowing for re-heating and re-moulding
* Edges trim easily
* Excellent rigidity ideal for medium and large splints
* Shorter harden time time for therapists
* Good memory allowing for re-heating and re-moulding
* Edges trim easily
Size Available
|
Thickness
|
Perforation
|
Coating
|
Dimension
|
Color
|
||||
|
1.6mm,
2.4mm
, 3.2mm, 4.0mm and more customized
|
0, 1%, 5%, 10%, 15%, 30% and more customized
|
Coated
Uncoated
|
90*60 cm
45*60 cm
and more customized
|
White, brown, blue, red, dark brown
and more customized
|
||||
|
(All the above parameters can be combined freely)
|
|
|
|
|
||||
How to Use
1.
Adjust the water bath to 75℃, put the sheet into hot water for 2-3 minutes.
2. After the sheet turns to soft and pliable, put it on a soft cloth and dry it on.
3. Mould it according to the body part, hoop and loop straps be hold the splint in place, padding/liner materials increase
patient comfort.
4. Keep the sheet for 10 minutes, it can be plastic well.
5. With a perfect memory, it can be remoulded more than 8 times.
2. After the sheet turns to soft and pliable, put it on a soft cloth and dry it on.
3. Mould it according to the body part, hoop and loop straps be hold the splint in place, padding/liner materials increase
patient comfort.
4. Keep the sheet for 10 minutes, it can be plastic well.
5. With a perfect memory, it can be remoulded more than 8 times.
Attention:
1. Adjust the water temperature to 65℃-75℃, don’t more than 80 ℃ , if more than 80 ℃, it will make the splint contraction and deformation.
2. Be sure not to place the sheet in hot water for too long time. In general, 2-3 minutes should be enough to make it soften and activation.
3. Working surrounding. When the operation room temperature is more than 20℃, it can be plastic within 1.5-3 minutes; When the room temperature drop to 10℃, the plastic time is about 30-50 minutes.
4. For orthopedic splints, after activation, it can be stretched to 1.5 times as its original size. Excessive pulling could affect its reshaped resilience and damage its memory function.
5. How to restore a molding splint back to its factory settings? Just put it into the hot water with 65℃-75 ℃, and then it will rebound automatically after 5 minutes.
6. Due to the characteristics of the material itself, in the activation process, it will occasionally occur small area of sticky. Please be sure not to pull randomly. When it leaves the water to solidify, it will automatically relieves adhesion.
7. Storage in room temperature is enough.
8. The products is Eco-friendly, put it outside in the yard with natural climate about 12 month, it will be degraded by itself.
1. Adjust the water temperature to 65℃-75℃, don’t more than 80 ℃ , if more than 80 ℃, it will make the splint contraction and deformation.
2. Be sure not to place the sheet in hot water for too long time. In general, 2-3 minutes should be enough to make it soften and activation.
3. Working surrounding. When the operation room temperature is more than 20℃, it can be plastic within 1.5-3 minutes; When the room temperature drop to 10℃, the plastic time is about 30-50 minutes.
4. For orthopedic splints, after activation, it can be stretched to 1.5 times as its original size. Excessive pulling could affect its reshaped resilience and damage its memory function.
5. How to restore a molding splint back to its factory settings? Just put it into the hot water with 65℃-75 ℃, and then it will rebound automatically after 5 minutes.
6. Due to the characteristics of the material itself, in the activation process, it will occasionally occur small area of sticky. Please be sure not to pull randomly. When it leaves the water to solidify, it will automatically relieves adhesion.
7. Storage in room temperature is enough.
8. The products is Eco-friendly, put it outside in the yard with natural climate about 12 month, it will be degraded by itself.
EVERY SHEET HAS A SEPERATE PALSTIC BAG, THEN 10 SHEETS WITH IN ONE CARTON BOX. EVERY BAG AND BOX,WE HAVE LEBAL TO INDICATE IT.
We accept Neutral Packing, Customized Packing, and Standard Packing.
Certifications
CE, ISO9001, ISO14001, ISO13485 TEST REPORT FROM OUR AUTHORIZATION AGENTICY AND OUR LOCAL GRADE A CLASS THREE HOSPITALS.
In additional, we approved two National Patented Certification:
1. Nano-antibacterial function
The Nano-materials can sterilizate the colibacillus, staphylococcus aureus and candida albicans.
2. Nano-far infrared function.
Infrared material is able to improve our micro-circulation and expand the capillaries of skin and subcutis which accelerates blood circulation and metabolism, and eases muscular tension and pain.
In additional, we approved two National Patented Certification:
1. Nano-antibacterial function
The Nano-materials can sterilizate the colibacillus, staphylococcus aureus and candida albicans.
2. Nano-far infrared function.
Infrared material is able to improve our micro-circulation and expand the capillaries of skin and subcutis which accelerates blood circulation and metabolism, and eases muscular tension and pain.
Why Choose Us
|
1
|
Repeated plasticity
|
|
2
|
No deformation after cooling
|
|
3
|
Very good tensile, you can stretch it freely
|
|
4
|
Good quality
|
|
5
|
Good breathability
|
|
6
|
High strength
|
|
7
|
Good memory function
|
|
8
|
Avirulent and insipidity
|
|
9
|
No stimulation to the skin
|
|
10
|
Biodegradable
|
Hot Searches
