- Product Details
- {{item.text}}
Quick Details
-
Place of Origin:
-
Shandong, China
-
Model Number:
-
FH01
-
Product Name:
-
Electric Home Nursing Care Bed
-
Size:
-
2110x970x520/790mm
-
Height(from floor):
-
520-790mm
-
Back plate adjusting:
-
0~65°
-
Knee section adjusting:
-
0~30°
-
Trendelenburg/Reversal trendelenburg:
-
11°/11°
-
Bedboard rotation:
-
90°
Quick Details
-
Warranty:
-
1 Year
-
After-sale Service:
-
Free spare parts
-
Brand Name:
-
MT MEDICAL
-
Place of Origin:
-
Shandong, China
-
Model Number:
-
FH01
-
Product Name:
-
Electric Home Nursing Care Bed
-
Size:
-
2110x970x520/790mm
-
Height(from floor):
-
520-790mm
-
Back plate adjusting:
-
0~65°
-
Knee section adjusting:
-
0~30°
-
Trendelenburg/Reversal trendelenburg:
-
11°/11°
-
Bedboard rotation:
-
90°
Product Description
>Product Introduction
*FH01 rotating nursing bed adopts wooden head and foot, wooden bed side, and the head and foot boards can be easily installed and removed;
*The guardrail adopts rotating guardrail, which is flexible in rotation; the bed surface adopts anti-fold special board, which is beautiful and comfortable.
*Equipped with a safe voltage motor, the user's position can be easily adjusted by operating the hand controller. Centrally controlled casters provide higher stability and easier operation.
*It can be used in conjunction with the YWJ-1 standing lift to facilitate the transfer of personnel.
Specification:
|
Size:
|
2110x970x520/790mm
|
|
|
Height(from floor):
|
520-790mm
|
|
|
Back plate adjusting:
|
0~65°
|
|
|
Knee section adjusting:
|
0~30°
|
|
|
Trendelenburg:
|
0~11°
|
|
|
Reversal trendelenburg:
|
0~11°
|
|
|
Bedboard rotation:
|
90°
|
|
|
Auto contour position
|
|
|
|
Battery backup
|
|
|
|
Safety load capacity:
|
240kgs
|
|
Detailed Images
Schematic diagram of hand control panel
S1: Back rising
S2: Back drop
S3: Legs rise
S4: Leg drop
S5: Back and leg linkage rise
S6: Back and leg linkage descent
S7: overall rise
S8: overall decline
S9: Lean forward
S10: lean back
S11: Spin out
S12:Screw in
S1+S4: Press and hold for 10 seconds to turn off the battery power supply when the battery is powered.
S3+S4: Press and hold for 5 seconds to enter reset state when not in reset state.
Usage instructions
After the nursing bed is powered on, the controller backlight is always on and the equipment is powered on normally.
If the backlight of the hand control flashes, the keys except the reset key S1 are invalid and a reset operation is required. Long press the S1 button, and the bed will perform the reset process: the back leg board will rise to the top, the bed will rotate back, the back board will be flat, the leg boards will be flat, the bed will drop to the bottom, the system will be reset and the backlight will be on.
1.
Generally, the buttons are operated by inching. Press and hold the button to perform the action, and release it to stop.
2.
S11 and S12 need to be pressed and held for 8 seconds to rotate out and screw in. After the motor starts to perform the action, you can release the button.
During the screw-out and screw-in motion, press any key to stop the rotation. Press the screw-out and screw-in keys to continue the screw-in and screw-out actions. Only after the rotation is in place can the overall lifting command be executed, making it easier for people to get in and out of the bed.
The nursing staff must not be within the rotation range of the nursing bed when rotating out and in.
3.
After turning off the AC power, only the battery supplies power, and the backlight of the hand control goes out. Manipulate any button to correspond to the push rod action. After the battery power is lower than 19V, the controller turns off the battery power supply.
4.
When the AC power is turned off, in order to protect the battery, please press and hold the S1+S4 key combination for 10 seconds to turn off the battery power supply and prevent the battery from self-depletion.
Related Products
Buyers Review
company information
CERTIFICATIONS
Exhibition and Our Team
Arab Health
CMEF
MEDICA
Packing&Shipping
FAQ
Q: Are you manufacturer ?
A: Yes,we have our own R&D team and sales team,We provide you one-stop service.
Q: Is OEM &ODM available in your factory ?
A: Yes, you just offer us necessary documents and then we will produce the products as your requirements.
Q: What is your Packing details?
A: 1.Wooden case or carton package,standard export packages
All of the productions are inspected carfully by QC before delivery.
Q: What is your Min.order?
A: There's no minimum quantity
A: Yes,we have our own R&D team and sales team,We provide you one-stop service.
Q: Is OEM &ODM available in your factory ?
A: Yes, you just offer us necessary documents and then we will produce the products as your requirements.
Q: What is your Packing details?
A: 1.Wooden case or carton package,standard export packages
All of the productions are inspected carfully by QC before delivery.
Q: What is your Min.order?
A: There's no minimum quantity
|
Payment
|
|
|
|
|
||||
|
|
TT
|
EXW
|
|
|
||||
|
|
|
FOB/FCA
|
|
|
||||
|
|
|
CNF
|
|
|
||||
|
|
|
CIF
|
|
|
||||
|
|
|
DDU/DAP
|
|
|
||||
|
|
L/C
|
L/C amount above 50,000 usd, we can accept L/C at sight
|
|
|
||||
|
|
West union
|
Amount lower than 5000usd
|
|
|
||||
|
Delivery Time
|
3~5days after receiving the payment
|
|
|
|
||||
Hot Searches
